ANRITSU

Anritsu's latest generation of handheld spectrum analyzers is the MS2720T Spectrum Master. This represents the company's highest performance handheld spectrum analyzer. Exciting new features and options bring more value and speed to the user.

• Broadband preamplifiers over the whole frequency range for increased sensitivity approximately 17 dB
• Three Sweep Modes: improved sweep speed, up to 100 times faster
• Resolution and Video Bandwidths from 1 Hz to 10 MHz
• New triggering choices, including hysteresis, hold-off, and delay
• More zero-span capabilities including 10 MHz RBW & VBW
• Enhanced Spectrum Analyzer Touch Screen GUI, including large marker display choice
• Choice of display options for readability: normal, black on white, night vision, color on white, or high contrast
• On-screen Interference Mapping as part of the Interference Analysis option
• LTE Measurements up to 20 MHz, plus support for Carrier Aggregation
• 30 MHz wide Zero-Span IF Output at 140 MHz center frequency for external demodulation of virtually any wideband signal
• Burst detect captures 200 μs bursts the first time, every time
• PIM Hunting for finding external IM products

Applications:

• Transmitter Spectrum Analysis–occupied bandwidth, channel power, adjacent channel power ratio, and modulation
• Received Signal Analysis–location and identification of in-band interference and out-of-band spurious signals, and spectral masks
• Signal Strength Mapping–to determine the most suitable location for antennas, base stations, and repeaters
• Field analysis of 3G and 4G Signals–fast sweep speed, field-swappable high capacity battery, smart measurements, and daylight-viewable display make the MS2720T an ideal choice for the challenges of rugged environments
• Broadcast measurement–AM & FM analog proofing measurements
• Interference Mitigation in many diverse situations including wireless patient telemetry in hospitals
• Burst Detect captures 200 μs bursts the first time, every time.
• PIM Hunting mode is optimized for finding external IM products in conjunction with the MW82119B PIM Master
• Two-port measurement of filters, attenuators, amplifiers, and cables using a tracking generator up to 20 GHz

Specifications:

• Frequency Range: 9 kHz to 43 GHz
• Dynamic Range: >106 dB in 1 Hz bandwidth at 2.4 GHz
• Phase Noise: -112 dBc/Hz @ 10 kHz offset at 1 GHz
• RF Connectors: N (f) for option 709, 713 and 720. Ruggedized K(m) for options 732 and 743
• Input Attenuation: 0 to 65 dB in 5 dB steps
• Amplitude Accuracy: ±0.5 dB typical
• Frequency Accuracy: Aging: ± 1.0 ppm/10 years; Accuracy: ± 0.3 ppm (25 °C ± 25°C) aging

Anritsu's latest generation of handheld spectrum analyzers is the MS2720T Spectrum Master. This represents the company's highest performance handheld spectrum analyzer. Exciting new features and options bring more value and speed to the user.

• Broadband preamplifiers over the whole frequency range for increased sensitivity approximately 17 dB
• Three Sweep Modes: improved sweep speed, up to 100 times faster
• Resolution and Video Bandwidths from 1 Hz to 10 MHz
• New triggering choices, including hysteresis, hold-off, and delay
• More zero-span capabilities including 10 MHz RBW & VBW
• Enhanced Spectrum Analyzer Touch Screen GUI, including large marker display choice
• Choice of display options for readability: normal, black on white, night vision, color on white, or high contrast
• On-screen Interference Mapping as part of the Interference Analysis option
• LTE Measurements up to 20 MHz, plus support for Carrier Aggregation
• 30 MHz wide Zero-Span IF Output at 140 MHz center frequency for external demodulation of virtually any wideband signal
• Burst detect captures 200 μs bursts the first time, every time
• PIM Hunting for finding external IM products

Applications:

• Transmitter Spectrum Analysis–occupied bandwidth, channel power, adjacent channel power ratio, and modulation
• Received Signal Analysis–location and identification of in-band interference and out-of-band spurious signals, and spectral masks
• Signal Strength Mapping–to determine the most suitable location for antennas, base stations, and repeaters
• Field analysis of 3G and 4G Signals–fast sweep speed, field-swappable high capacity battery, smart measurements, and daylight-viewable display make the MS2720T an ideal choice for the challenges of rugged environments
• Broadcast measurement–AM & FM analog proofing measurements
• Interference Mitigation in many diverse situations including wireless patient telemetry in hospitals
• Burst Detect captures 200 μs bursts the first time, every time.
• PIM Hunting mode is optimized for finding external IM products in conjunction with the MW82119B PIM Master
• Two-port measurement of filters, attenuators, amplifiers, and cables using a tracking generator up to 20 GHz

Specifications:

• Frequency Range: 9 kHz to 43 GHz
• Dynamic Range: >106 dB in 1 Hz bandwidth at 2.4 GHz
• Phase Noise: -112 dBc/Hz @ 10 kHz offset at 1 GHz
• RF Connectors: N (f) for option 709, 713 and 720. Ruggedized K(m) for options 732 and 743
• Input Attenuation: 0 to 65 dB in 5 dB steps
• Amplitude Accuracy: ±0.5 dB typical
• Frequency Accuracy: Aging: ± 1.0 ppm/10 years; Accuracy: ± 0.3 ppm (25 °C ± 25°C) aging

The Anritsu MS4640A Vector Network Analyzer offers a new level of performance for device modeling engineers struggling to accurately and reliably characterize their devices, for R&D engineers pushing the last fraction of a dB out of their state-of-the-art designs, and for the manufacturing engineer trying to maximize throughput without sacrificing accuracy.

The Anritsu MS4640A VNA offers the broadest coverage in a single instrument, 70 kHz to 70 GHz. The additional two decades at the low end are even more impressive than the guaranteed 70 GHz coverage on the high end, for better device modeling without having to switch to another RF VNA. The industry leading 100 dB dynamic range at 70 GHz, coupled with excellent raw performance, will offer the best accuracy and stability to the toughest measurements. And when you can achieve synthesized sweeps at the industry fastest 20 µs/point, while achieving greater than 80dB sensitivity, the result is the best all-around VNA available on the market today, and for a long time to come.

The MS4644A VectorStar is a Microwave Vector Network Analyzer. The MS4644A VNA is an instrument system that contains a built-in source, test set, and analyzer.

The Anritsu VectorStar features a broad frequency range, fast measurement speed, superior dynamic range, and advanced time-domain processing with up to 100,000 data points. And as your needs grow, so can your VectorStar with frequency range upgrades to 110 GHz and beyond, two-port to multiport upgrades, and linear to nonlinear measurement upgrades. Simply put, the VectorStar is a smart decision now, and a smart decision later.

The MS4644A VectorStar Active Device Measurements Suite lets you perform single or multi-frequency gain compression measurements, while providing internal bias tees, two or four step attenuators, and extended power range control.

MS4644A measurement times include sweep time, and band switching time, in single channel mode. Typical. 20 us/point is achieved in true swept mode, with 25,000 points, with ALC turned on for level accuracy, with display turned-on for tuning purposes, with locking turned-on for frequency accuracy and repeatability, with correction turned on to meet published residual specifications, and over the full span of the product with all band-switch points to fully characterize a device.

The Anritsu VNA is destined to become the ideal microwave VNA platform, built on an Open Windows architecture, with unlimited potential such as 100,001 points in single channel mode, with versatile connectivity, and intuitive interface.

• Broadest frequency span from a single coaxial test port covering 70 kHz to 70 GHz in a single instrument and 70 kHz to 110 GHz in the Broadband configuration
• Fastest swept synthesized measurement speed < 20 µsec per point
• Superior Dynamic Range - up to 140dB
• High available power - up to 13dBm
• Best test port characteristic performance - up to 50dB in Directivity, Source Match and Load Match
• Most convenient automatic calibration system with best accuracy
  • Use Precision AutoCal for an easy, one-button method of VNA calibration
  • Better accuracy than traditional SOLT calibration
  • Spend less time setting up the VNA for the next production run
• Highest data resolution utilizing 100,000 points for maximum flexibility
• Best device modeling data
  • Accurately model devices down to DC using calibrated, traceable values starting at 70 kHz
  • Eliminate the need for concatenation of two VNAs
• Best time domain analysis
  • 100,000 points and 700 kHz frequency step size provide the most accurate, highest resolved, Low Pass Mode measurements
  • Measure long transmission lines with the best non-aliasing range
• Includes as standard - design tools essential for high-frequency IC, PCB, and module design

Features    

• Up to 100,000 total test points in single channel 
• 12 markers per Trace 
• 2-Port Measurements 
• 16 channels, each with up to 16 traces 
• Both single and segmented limits can be used for PASS/FAIL testing 

The Anritsu MS4640A VNA offers the broadest coverage in a single instrument, 70 kHz to 70 GHz. The additional two decades at the low end are even more impressive than the guaranteed 70 GHz coverage on the high end, for better device modeling without having to switch to another RF VNA. The industry leading 100 dB dynamic range at 70 GHz, coupled with excellent raw performance, will offer the best accuracy and stability to the toughest measurements. And when you can achieve synthesized sweeps at the industry fastest 20 µs/point, while achieving greater than 80dB sensitivity, the result is the best all-around VNA available on the market today, and for a long time to come.

The MS4644A VectorStar is a Microwave Vector Network Analyzer. The MS4644A VNA is an instrument system that contains a built-in source, test set, and analyzer.

The Anritsu VectorStar features a broad frequency range, fast measurement speed, superior dynamic range, and advanced time-domain processing with up to 100,000 data points. And as your needs grow, so can your VectorStar with frequency range upgrades to 110 GHz and beyond, two-port to multiport upgrades, and linear to nonlinear measurement upgrades. Simply put, the VectorStar is a smart decision now, and a smart decision later.

The MS4644A VectorStar Active Device Measurements Suite lets you perform single or multi-frequency gain compression measurements, while providing internal bias tees, two or four step attenuators, and extended power range control.

MS4644A measurement times include sweep time, and band switching time, in single channel mode. Typical. 20 us/point is achieved in true swept mode, with 25,000 points, with ALC turned on for level accuracy, with display turned-on for tuning purposes, with locking turned-on for frequency accuracy and repeatability, with correction turned on to meet published residual specifications, and over the full span of the product with all band-switch points to fully characterize a device.

The Anritsu VNA is destined to become the ideal microwave VNA platform, built on an Open Windows architecture, with unlimited potential such as 100,001 points in single channel mode, with versatile connectivity, and intuitive interface.

• Broadest frequency span from a single coaxial test port covering 70 kHz to 70 GHz in a single instrument and 70 kHz to 110 GHz in the Broadband configuration
• Fastest swept synthesized measurement speed < 20 µsec per point
• Superior Dynamic Range - up to 140dB
• High available power - up to 13dBm
• Best test port characteristic performance - up to 50dB in Directivity, Source Match and Load Match
• Most convenient automatic calibration system with best accuracy
  • Use Precision AutoCal for an easy, one-button method of VNA calibration
  • Better accuracy than traditional SOLT calibration
  • Spend less time setting up the VNA for the next production run
• Highest data resolution utilizing 100,000 points for maximum flexibility
• Best device modeling data
  • Accurately model devices down to DC using calibrated, traceable values starting at 70 kHz
  • Eliminate the need for concatenation of two VNAs
• Best time domain analysis
  • 100,000 points and 700 kHz frequency step size provide the most accurate, highest resolved, Low Pass Mode measurements
  • Measure long transmission lines with the best non-aliasing range
• Includes as standard - design tools essential for high-frequency IC, PCB, and module design

Features    

• Up to 100,000 total test points in single channel 
• 12 markers per Trace 
• 2-Port Measurements 
• 16 channels, each with up to 16 traces 
• Both single and segmented limits can be used for PASS/FAIL testing 

The S331L, featuring Classic and Advanced measurement modes, is the highest value in a rugged, handheld cable and antenna analyzer. The S331L replaces the current value line S331D which is part of the longest running portable cable and antenna analyzer family in history. Utilizing the latest advancements in technology, the S331L has been optimized for field conditions, is easy to use, and has efficient sweep management capabilities.

The S331L delivers an entire workday of battery operating time, the most ever offered in a handheld cable and antenna analyzer. With its large outdoor viewable 7-inch TFT touch screen display, new intuitive GUI, and classic mode that mimic the S331D basic measurement flow, the S331L is very easy to use, and can significantly increase a user's efficiency in the field.

The S331L is for contractors, installers, and wireless service providers, who need an instrument to reduce per site maintenance expenses. Anyone who needs to make basic cable/antenna and power measurements will benefit from the new S331L Site Master. The simple no option configuration and high-value pricing make the S331L ideal for tower contractors and can be easily provisioned by stocking distributors and rental companies alike.

For contractors who don't have time to look for nearby power sources, the S331L will last an entire workday on a single battery charge, meaning you can be a lot more productive with your day. Not only does the Site Master S331L run longer, it also has a lot more memory internally so you don't have to worry about running out of space for all of those extra measurements you just made. Your CAPEX affects your profitability and stability. The new S331L is the best value in a handheld cable and antenna analyzer period. You can get more done with a minimal negative impact on your operating expenses.

Key Features:

• 2 MHz to 4 GHz Handheld Cable and Antenna Analyzer, impact, dust, and splash resistant
• More than 8 hours of continuous battery operation
• Standard built-in InstaCal module and Power Meter
• FlexCal maintains calibration with frequency changes
• Built-in one button Help function
• 800 x 480 7” TFT touch screen display and multiple USB ports
• Internally store >1000 files with fast preview of stored traces
• Supported by Multiwave Smart Aligner Android application
• Industry standard *.dat format compatible with Line Sweep Tools (LST) and HHST
• Optical Connector Inspection (requires Visual Inspection Probe)
• Standard three-year warranty (battery one-year warranty)

Benefits:

• Return Loss
• VSWR
• Cable Loss
• Smith Chart (50/75 ohm selectable)
• 1-port Phase
• Distance-to-Fault Return Loss
• Distance-to-Fault VSWR
• RF Power (50 MHz to 4 GHz)
• VIP Mode; Optical connector inspection with IEC 61300-3-35 based Pass/Fail standard (requires USB Video Inspection Probe G0306A, sold separately)

Applications:
1-port RF Cable and Antenna testing 2 MHz to 4 GHz such as:

• Cellular
• Public Safety
• Radio and TV broadcasting
• Aerospace and defense

Measurements include:

• Return Loss
• VSWR
• Cable Loss
• Smith Chart (50/75 ohm selectable)
• 1-port Phase
• Distance-to-Fault Return Loss
• Distance-to-Fault VSWR
• RF Power (50 MHz to 4 GHz)

The S331L is a rugged, handheld cable and antenna analyzer. Utilizing the latest advancements in technology, the S331L has been optimized for field conditions, is easy to use, and has efficient sweep management capabilities. The S331L delivers an entire workday of battery operating time. With its large outdoor viewable 7” TFT touch screen display, intuitive GUI, and classic mode, the S331L can significantly increase a user’s efficiency in the field.

The S331L, featuring Classic and Advanced measurement modes, is the highest value in a rugged, handheld cable and antenna analyzer. The S331L replaces the current value line S331D which is part of the longest running portable cable and antenna analyzer family in history. Utilizing the latest advancements in technology, the S331L has been optimized for field conditions, is easy to use, and has efficient sweep management capabilities.

The S331L delivers an entire workday of battery operating time, the most ever offered in a handheld cable and antenna analyzer. With its large outdoor viewable 7-inch TFT touch screen display, new intuitive GUI, and classic mode that mimic the S331D basic measurement flow, the S331L is very easy to use, and can significantly increase a user's efficiency in the field.

The S331L is for contractors, installers, and wireless service providers, who need an instrument to reduce per site maintenance expenses. Anyone who needs to make basic cable/antenna and power measurements will benefit from the new S331L Site Master. The simple no option configuration and high-value pricing make the S331L ideal for tower contractors and can be easily provisioned by stocking distributors and rental companies alike.

For contractors who don't have time to look for nearby power sources, the S331L will last an entire workday on a single battery charge, meaning you can be a lot more productive with your day. Not only does the Site Master S331L run longer, it also has a lot more memory internally so you don't have to worry about running out of space for all of those extra measurements you just made. Your CAPEX affects your profitability and stability. The new S331L is the best value in a handheld cable and antenna analyzer period. You can get more done with a minimal negative impact on your operating expenses.

Key Features:

• 2 MHz to 4 GHz Handheld Cable and Antenna Analyzer, impact, dust, and splash resistant
• More than 8 hours of continuous battery operation
• Standard built-in InstaCal module and Power Meter
• FlexCal maintains calibration with frequency changes
• Built-in one button Help function
• 800 x 480 7” TFT touch screen display and multiple USB ports
• Internally store >1000 files with fast preview of stored traces
• Supported by Multiwave Smart Aligner Android application
• Industry standard *.dat format compatible with Line Sweep Tools (LST) and HHST
• Optical Connector Inspection (requires Visual Inspection Probe)
• Standard three-year warranty (battery one-year warranty)

Benefits:

• Return Loss
• VSWR
• Cable Loss
• Smith Chart (50/75 ohm selectable)
• 1-port Phase
• Distance-to-Fault Return Loss
• Distance-to-Fault VSWR
• RF Power (50 MHz to 4 GHz)
• VIP Mode; Optical connector inspection with IEC 61300-3-35 based Pass/Fail standard (requires USB Video Inspection Probe G0306A, sold separately)

Applications:
1-port RF Cable and Antenna testing 2 MHz to 4 GHz such as:

• Cellular
• Public Safety
• Radio and TV broadcasting
• Aerospace and defense

Measurements include:

• Return Loss
• VSWR
• Cable Loss
• Smith Chart (50/75 ohm selectable)
• 1-port Phase
• Distance-to-Fault Return Loss
• Distance-to-Fault VSWR
• RF Power (50 MHz to 4 GHz)