Latest Products

NEW GE INSPECTION TECHNOLOGIES USN 60 FLAW DETECTOR SALE!!

The GE USN 60 series ultrasonic flaw detectors have been optimized for use in direct sunlight and operation at extreme temperatures. These characteristics make the instruments ideally suited for outdoor use with its increased long battery operation time. Depending on the applications challenges, you have the choice between the USN 60 and the USN 60L version.
$2,800.00
Qty:
Add to Cart Buy Now
Print

GE Inspection Technologies USN 60 is designed for outdoor use with two independent gates to monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications. It features pulse echo, dual, and thru-transmission test modes as well as measurement modes for zero-to-first and multi-echo with selectable flank or peak detection. This flaw detector also calculates weld ratings according to AWS specification D1.1 (formula D=A-B-C).

The combination of the rugged USN durability, 11 hours of battery operation, fast rotary knob operation, outstanding ultrasonic performance, and the ﾓsquare wave pulserﾔ form a powerful portable ultrasonic inspection tool.

Optimized outdoor use design

  • Extreme temperature use (-20°C to 55°C /-4°F to 130°F)
  • Easy to view in direct sunlight
  • 11 hours battery operation

Vibrant colors

  • Hi-resolution color LCD display produces ﾓAnalog Look and Performanceﾔ echo dynamics.
  • 4 selectable vibrant display color schemes to match lighting conditions.
  • Gates and gate functions are color coded for easy identification and fast adjustment.

User Preferred Features

  • Simple operation with fast rotary knob adjustments; gain is always directly accessible with the left-hand rotary knob and lockable.
  • Auto CAL makes calibration fast & easy.
  • 15 Hz to 6 kHz (spike mode) PRF and 15 Hz to 2 kHz (square mode) PRF (pulse repetition frequency)
  • 2 independent gates monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications.
  • 250 KHz to 25 MHz frequency range.
  • RF display mode enhances signal evaluation and bond inspection of dissimilar materials.
  • 4 selectable damping settings (50, 75, 150, 500 ohms) for optimum probe performance.
  • 1 mm to 28 m (0.040ﾔ to 1100ﾔ) range (in steel) covers thin to lengthy acoustically clean materials.
  • dB REF key evaluates subsequent echoes gain value and amplitude against the highest echo in Gate A (reference echo) when activated.
  • IF (Interface) Gate Option for automatic start of the display, Gate A, Gate B, and / or DAC / TCG for immersion testing applications.
  • VGA Output Option provides an easy way to connect to a PC monitor or PC projector for viewing by large audiences or training purposes.
  • RF Output Option outputs the raw RF waveform via a standard Lemo connector for further analysis.
  • BEA (Backwall Echo Attenuator) Option allows independent gain control of the region under Gate B for backwall echo monitoring.
  • 19ﾔ Rack Mount Model.

Specifications:

Range USN 600.040ﾔ to 1100ﾔ (1 mm to 28 m) at steel velocity; range selectable in fixed steps or continuously variable
Material VelocityContinuously adjustable from 0.0098 to 0.6299 inches/µs (250 to 16,000 m/s); 65 selectable material velocities
Display Delay-20 to 3498 µs in steel (dependent on range)
Probe Delay/Zero Offset0 to 999.9 µs
Damping50, 75, 150, 500 ohms
Gain0 to 110 dB adjustable in selectable steps 0.1, 0.5, 1.0, 2.0, 6.0, user definable, and locked
Test ModesPulse echo, dual, and thru-transmission
PulserSquare wave excitation pulse
Pulse Voltage (Square wave pulser mode)50 to 450 V scrollable in 10 V adjustments
Pulse Width (Square wave pulser mode)Tunable from 50 to 1000 ns in 10 ns adjustments
Pulse Energy (Spike mode)Low, High
Pulse Repetition Frequency USN 60Autolow, autohigh, manually adjustable from 15 to 6000 Hz (spike mode) and 15 to 2000 Hz in square wave mode, in 5 Hz increments, external trigger (spike mode only)
Bandwidth (amplifier bandpass)0.25 to 25 MHz with 10 selectable settings including broadband
Gate MonitorsTwo independent flaw gates controllable over entire sweep range
Measurement ModesZero-to-first, multi-echo with selectable flank or peak detection
RectificationPositive halfwave, negative halfwave, fullwave, RF
Reject (suppression)0 to 80% linear
UnitsInch, millimeter, or microsecond selectable
Operating Temperature-20° to 55°C (-4° to 130°F);
-25° to 70ºC (-13° to 158 º F ) storable
LanguagesSelectable English, German, French, Spanish, Italian, Portuguese, Norwegian, Swedish, Finnish, Danish, Dutch, Russian, Czech, Romanian, Slovakian
Probe ConnectorsBNC or Lemo
KeypadInternational symbols
Battery PowerLithium Ion battery pack; NiMH, NiCad or alkaline cells substitutable
Battery Life11 hours on Li-Ion battery pack
Size11.1ﾔ W x 6.75ﾔ H x 6.25ﾔ D (282 x 171 x 159 mm)
Display640 x 480 pixels Color LCD 132.48 x 99.36 mm
Weight6.6 lbs. (3.0 kg) Li-Ion battery;
3.5 lbs.(1.6 kg) without battery
Color LegEasy identification of leg and skip distances for angle beam inspection in A-scan or grid background colors
Weld Rating CalculationSimplifies the rating of weld indications according to AWS specification D1.1, (formula D=A-B-C)
Dust Proof/DrippingWater ProofAs per IEC 529 specification for IP54 classification
ComplianceEMC/EMI: EN 55011:2007, EN 61000-6-2:2005 Ultrasound: EN 12668, ASTM E317
  • Availability: 10 In Stock
  • Model: GE INSPECTION TECHNOLOGIES USN 60 FLAW DETECTOR
  • Brand: GE INSPECTION TECHNOLOGIES

Write Review

Note: Do not use HTML in the text.