Latest Products
-
NEW GSSI STRUCTURESCAN MINI XT GPR SALE!!
$5,000.00 -
NEW GSSI STRUCTURESCAN PRO SIR 4000 SALE!!
$4,100.00 -
NEW GSSI STRUCTURESCAN MINI LXT GPR SALE!!
$3,500.00 -
NEW GSSI UTILITYSCAN PRO GPR SALE!!
$6,700.00 -
NEW MALA GROUND EXPLORER GX HDR GPR SALE!!
$6,100.00 -
NEW MALA EASY LOCATOR CORE INTELLIGENT GROUND PENETRATING RADAR (GPR) SALE!!
$11,100.00 -
NEW MALA EASY LOCATOR PRO WIDERANGE HDR DUAL FREQUENCY SALE!!
$7,000.00 -
USED US RADAR QUANTUM IMAGER TRIPLE FREQUENCY GPR SYSTEM SALE!!
$5,000.00
SONATEST SITESCAN 250S ULTRASONIC FLAW DETECTOR SALE!!
Sonatest's comprehensive range of portable ultrasonic flaw detectors provide the end user with unrivalled flexibility and performance in the field of Non Destructive Flaw detection.
$3,000.00
All instruments are field upgradable, reducing your downtime and increasing your working flexibility, rising to the challenge of your application. Sonatest are proud to offer some of the most powerful and rugged UT flaw detectors on the market with our product development always focussed on operator and end user requirements.
The 250S is the top of the range instrument in this series. It includes all the software features of the 150S, combined with a narrow band amplifier and TCG, for more demanding ultrasonic applications. The square wave ActiveEdge pulser automatically optimizes for each filter band selected, ensuring maximum performance.
Features
- Sunlight viewable, color trans-reflective TFD display
- Easy-to-use, user friendly operating system
- DAC, AWS, API and DGS (AVG) included at no extra cost!
- Digital flaw location (thickness and angle beam trig.)
- Curve correction
- Full screen A-Scan display
- Waterproof - IP67 case
- Shockproof case
- 15 hour battery life!
- BNC or Lemo Connectors - your choice
- Wide band amplifier
- Affordable price
- Thickness Data Logger (8,000 readings)
- Auto-Cal for fast set-up
- 2 gates
- Depth/E-E/Trig measurement
- Auto-Cal
- DAC/AWS/AVG
- 8000 thickness readings storage capacity
Applications
Ideal for the following applications: Casting Inspection, Corrosion Inspection, Crack Detection, General Flaw Detection, Maintenance, Pitting Detection, Welding Inspection.
Specifications:
| Test Range | 0-5mm (0.2in) up to 0-10000 (400in) at steel velocity. Variable in sequence, 10mm or 1mm |
| Velocity | 1000 – 9999 m/s |
| Probe Zero | 0 – 999.999 us |
| Delay | 0 – 10000m at steel velocity in 0.05 steps (0 – 400 in 0.002 in steps) |
| Gain | 0 – 110dB in 0.5, 1, 2, 6, 10, 14, 20 dB steps |
| Test Modes | Pulse echo and transmit-receive |
| Gates | Two fully independent gates for echo monitoring and thickness measurement. Start and width adjustable over full range of unit, amplitude variable from 0 to 100% FSH. Bar presentation. Positive or negative triggering for each gate with audible and visual alarms. |
| Measurement Modes | |
| Depth | Depth and amplitude of signal in gate |
| Echo – Echo | Echo – Echo distance, automatic gate 2 position |
| Gate to Gate | Echo – Echo distance, manual gate 2 position |
| Trig | Trigonometric display of beam path, depth and surface distance Calculation of skip depth and curve surface compensation, X-offset for transducer |
| T-Min | Holds minimum thickness in depth mode |
| Pulser Voltage | -200 volt peak amplitude, rise/fall time <10ns into 50 ohm |
| Pulser Width | Fixed 100ns 30 – 250 ns linked to filter band |
| Pulser Repetition Frequency | Selectable 5 – 1000Hz. |
| Display | Colour transflective TFT Display area 111.4 x 83.5mm (4.39 x 3.29 in) A-scan area 315 x 200 max Variable brightness Sunlight viewable 8 Selectable colour schemes for A-scan & menu |
| Screen Update Rate | 50 or 60Hz |
| Rectification | Full Wave, positive, negative, RF |
| Frequency Bands | Broadband 1 – 10 Mhz (-6dB) |
| Vertical Linearity | 1% full screen height |
| Amplifier Linearity | - 0.1 dB |
| Horizontal Linearity | 0.33% full screen width |
| Reject | 50% Suppressive LED warning light when activated |
| Waveform Smoothing | Produces a smooth signal envelope |
| Units | mm, inches or time |
| AGC | Automatic Gain Control sets selected echo to a user defined level (10-90%) |
| DAC | Up to 10 points may be entered and used to digitally draw a DAC curve Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes |
| AWS | Automatic defect sizing in accordance with AWS D1.1 Structural Welding Code |
| API | Automatic defect sizing in accordance with API 5UE |
| AVG/DGS | Automatic defect sizing using probe data |
| TCG | Time corrected Gain 40dB dynamic range, 30dB per microsecond, up to 10 points for curve definition. |
| A-scan Memory | 800 waveforms |
| Panel Memory | 100 stores for calibration setting |
| Thickness Logging | 8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets Transferable to Excel using optional SDMS |
| Auto-Cal | Automatic calibration with two echoes |
| Reference Waveform | Recalled waveform can be shown in a different colour to live waveform for direct comparison |
| Display Freeze | Holds current waveform on screen |
| Peak Memory | For echo-dynamic pattern capture |
| Front USB | For connection to PC, keyboard and printer |
| Outputs | Serial Interface, composite video (PAL & NTSC), analogue output for amplitude and distance updated at PRF rate Transmitter sync output |
| Battery | Lithium Ion 14.4V 5.0 ampere hours Up to 16 hours, indication of battery charge. Recharge time 4 hours. Mains pack option |
| Charger | 100 – 240 VAC, 50-60Hz |
| Environmental | Meets IP67 |
| Temperature Range | Operating -10o C to 55o C (14o F – 131o F) Storage -40o C to 75o C (-40o F to 167o F) |
| Size | 256 x 145 x 145mm (10 x 5.7 x 5.7 in.) |
| Weight | 2.5Kg (5.5 lbs) with battery |
- Availability: 10 In Stock
- Model: SONATEST SITESCAN 250S ULTRASONIC FLAW DETECTOR
-
Brand:
