Latest Products
-
NEW GSSI STRUCTURESCAN MINI XT GPR SALE!!
4,692.50€
-
NEW GSSI STRUCTURESCAN PRO SIR 4000 SALE!!
3,847.85€
-
NEW GSSI STRUCTURESCAN MINI LXT GPR SALE!!
3,284.75€
-
NEW GSSI UTILITYSCAN PRO GPR SALE!!
6,287.95€
-
NEW MALA GROUND EXPLORER GX HDR GPR SALE!!
5,724.85€
-
NEW MALA EASY LOCATOR CORE INTELLIGENT GROUND PENETRATING RADAR (GPR) SALE!!
10,417.35€
-
NEW MALA EASY LOCATOR PRO WIDERANGE HDR DUAL FREQUENCY SALE!!
6,569.50€
-
USED US RADAR QUANTUM IMAGER TRIPLE FREQUENCY GPR SYSTEM SALE!!
4,692.50€
NEW ZETEC TOPAZ16 PORTABLE 16 CHANNEL PHASED ARRAY INSTRUMENT SALE!!
The Zetec TOPAZ16 is a 16 channel fully integrated phased array UT device for non-destructive testing (NDT) projects. TOPAZ16 is ideal for most common applications including weld and corrosion inspections and delivers best in class productivity with unmatched value.The Zetec TOPAZ16 is a compact and lightweight phased array and ultrasonic testing instrument with 16 available channels. The Topaz 16 is ideal for use in the Oil & Gas, Power Generation, Manufacturing, and Transportation industries. The Topaz 16 digitizes up to 800%, featuring a 16-bit amplitude resolution, high signal quality, and less chance of saturation. With multiple scanning configurations, (sector, linear, and compound) this unit can handle all steps of an inspection, from preparation, to aquisition, to reporting. The full aluminum housing improves robustness and thermal transfer efficiency while not allowing air intake.
The Topaz 16 Portable 16 Channel Phased Array UT Instrument is available in two versions:
16/64
Featuring up to 16 active channels on up to 64 element probes, the 16/64 model is perfect for multi-group support. This model utilizes one probe type at a time. If more probe types are needed in the future, the unit can be upgraded to the 16/128 model through a software update.
16/128
Featuring up to 16 active channels on up to 128 element probes, this Topaz 16 model can configure multiple probe types at a time. For an enhanced inspection experience, the 16/128 model features conventional UT, TOFD, and Phased Array.
Applications:
- Weld inspection
- Corrosion mapping
- Encoded or manual inspection
- Inspection of complex components and more
Features:
- UltraVision Touch software with advanced focal law calculator, volumetric merge, and interactive help
- Multi-probe configuring model available
- 10.4" highly responsive, high-resolution display
- Compact aluminum casing with no air intake
- Internal solid state drive
Specifications:
Phased Array Channels | 16/128 or 16/64 |
UT Channels | 1 P/E or 1 P/C |
Amplitude Resolution | 16 bits |
Measurement Gates | 4 1 synchronization gate |
Data Interfaces | Ethernet 1000 Base-T 1 x USB 3.0 2 x USB 2.0 |
Maximum PRF | 12 kHz |
Data Compression | 1, 2, 4, 8, 16 |
Max. Pulser Voltage (Open Circuit) | 105V PA UT / 215V UT |
Max. Applied Voltage | (50 ohms) 75V PA UT / 200V UT |
Bandwidth | (-3 dB) from 0.5 to 18 MHz |
Rectification | Digital |
Filtering | Analog / Digital (FIR) |
Smoothing (Video Filter) | Digital |
Self-Check | Yes |
Battery Operation | Yes |
Air Intake | No |
Automated Probe Detection | Yes (with Zetec probe ID chip) |
Automated Scanner Detection | Yes (with Zetec probe ID chip) |
# Focal Laws | 256 |
Maximum Number of Samples | 8,192 |
Maximum Data File Size | 300 MB for 16/64 700 MB for 16/128 |
Encoder Interfaces | 2 quadrature-type |
Onboard Software | UltraVision Touch embedded |
Serves as Protection Key | License for UltraVision Touch |
Data Acquisition & Analysis (for remote data acquisition or off line postprocessing) | UltraVision Touch UltraVision 3 |
Embedded Hard Drive | 128 GB SSD |
Video Output | HDMI |
Voltage | 100 to 240 VAC |
Frequency | 50 or 60 Hz |
Maximum Power | 100 VA |
Operating Temperature Range | -10°C to 45°C (14°F to 113°F) |
Storage Temperature Range | -40°C to 70°C (-40°F to 158°F) |
Relative Humidity | 80% non-condensing |
Size (H × W × D) | 221 × 271 × 120 mm (8.7" × 10.6" × 4.7") |
Weight (including one battery) | 4.54 kg (10.0 lb) |
Instrument Calibration | Compliant with ISO 18563-1 / EN 12668-1 |
CE mark is an attestation of the conformity with all applicable directives and standards of the European Community. The TOPAZ16 is an instrument of class 1 and installation category II. |