SONATEST

Sort By:  
The 250S is the top of the range instrument in this series. It includes all the software features of the 150S, combined with a narrow band amplifier and TCG, for more demanding ultrasonic applications. The square wave ActiveEdge pulser automatically optimizes for each filter band selected, ensuring maximum performance.
$1,400.00
Sonatest's comprehensive range of portable ultrasonic flaw detectors provide the end user with unrivalled flexibility and performance in the field of Non Destructive Flaw detection.
$3,000.00
Sonatest Sitescan Flaw Detectors have always meant highly reliable, technician focused flaw detection equipment and this model builds on that tradition.
$1,400.00
Sonatest Sitescan Flaw Detectors have always meant highly reliable, technician focused and this range continues this tradition.
$1,900.00
The WAVE interactive flaw detector integrates the latest technologies available in order to create a revolution in the ultrasonic non-destructive testing equipment market.
$1,600.00
Introducing WAVE by Sonatest. It integrates the latest technologies available in order to create a revolution in the ultrasonic non-destructive testing equipment market. Not only is it innovative, but the customizable interface also optimizes the daily workflow, and a unique and embedded interactive scan plan, with ray-tracing capability and simulation tools, consolidates your results.
$3,000.00
Building on the new range of Digital Ultrasonic Flaw Detectors recently launched by Sonatest Ltd, the new Railscan 125 has been developed specifically for use in rail testing market and is walking stick compatible.
$1,000.00
The Veo3 multi-techniques allow inspectors to keep inspecting as they always have, with no need to change their current workflow and by doing so, users can benefit from the additional resolution and sizing performance of TFM while carrying out an already approved, trusted and reliable procedure.
$3,400.00
Retaining the best features of the established Veo line, the new Veo3 now offers a PCAP touch interface, user templates, and more importantly, live TFM. Key design elements of the Veo3 are user and performance focused. Based on superior and innovative digital technology and its live concurrent multi-scan / multi-technique capabilities, the Veo3 truly helps you to inspect with confidence.
$4,800.00
The prisma is an advanced ultrasonic flaw detector offering the technician an extremely comprehensive tool for test and measurement, which can be upgraded to include TOFD and Phased Array capability. An upgrade can be carried out wherever you are, there is no need to return the instrument, eliminating any downtime.
$4,000.00
Sonatest's comprehensive range of portable ultrasonic flaw detectors provide the end user with unrivalled flexibility and performance in the field of Non Destructive Flaw detection.
$1,300.00
The Masterscan name has always assured the technician of robust instrument construction combined with exceptional performance. Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser - square and spike) and excellent signal to noise ratio are key functions in the Masterscan range.
$3,600.00
The Sonatest Masterscan D-70 ultrasonic flaw detector offers encoded B-Scan, Advanced Thickness Logging and Dryscan inspection options. It also benefits from advanced defect sizing tools.
$1,500.00
The Masterscan name has always assured the technician of robust instrument construction combined with exceptional performance. Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser - square and spike) and excellent signal to noise ration are key functions in the Masterscan range.
$2,000.00
USED SONATEST SITESCAN 250S ULTRASONIC FLAW DETECTOR SALE!! (SONATEST SITESCAN 250S ULTRASONIC FLAW DETECTOR)

Sonatest's comprehensive range of portable ultrasonic flaw detectors provide the end user with unrivalled flexibility and performance in the field of Non Destructive Flaw detection.

All instruments are field upgradable, reducing your downtime and increasing your working flexibility, rising to the challenge of your application. Sonatest are proud to offer some of the most powerful and rugged UT flaw detectors on the market with our product development always focussed on operator and end user requirements.

Features

  • Sunlight viewable, color trans-reflective TFD display
  • Easy-to-use, user friendly operating system
  • DAC, AWS, API and DGS (AVG) included at no extra cost!
  • Digital flaw location (thickness and angle beam trig.)
  • Curve correction
  • Full screen A-Scan display
  • Waterproof - IP67 case
  • Shockproof case
  • 15 hour battery life!
  • BNC or Lemo Connectors - your choice
  • Wide band amplifier
  • Affordable price
  • Thickness Data Logger (8,000 readings)
  • Auto-Cal for fast set-up
  • 2 gates
  • Depth/E-E/Trig measurement
  • Auto-Cal
  • DAC/AWS/AVG
  • 8000 thickness readings storage capacity

Applications

Ideal for the following applications: Casting Inspection, Corrosion Inspection, Crack Detection, General Flaw Detection, Maintenance, Pitting Detection, Welding Inspection.

Specifications:

Test Range0-5mm (0.2in) up to 0-10000 (400in) at steel velocity. Variable in sequence, 10mm or 1mm
Velocity1000 – 9999 m/s
Probe Zero0 – 999.999 us
Delay0 – 10000m at steel velocity in 0.05 steps (0 – 400 in 0.002 in steps)
Gain0 – 110dB in 0.5, 1, 2, 6, 10, 14, 20 dB steps
Test ModesPulse echo and transmit-receive
GatesTwo fully independent gates for echo monitoring and thickness measurement. Start and width adjustable over full range of unit, amplitude variable from 0 to 100% FSH. Bar presentation. Positive or negative triggering for each gate with audible and visual alarms.
Measurement Modes
DepthDepth and amplitude of signal in gate
Echo – EchoEcho – Echo distance, automatic gate 2 position
Gate to GateEcho – Echo distance, manual gate 2 position
TrigTrigonometric display of beam path, depth and surface distance Calculation of skip depth and curve surface compensation, X-offset for transducer
T-MinHolds minimum thickness in depth mode
Pulser Voltage-200 volt peak amplitude, rise/fall time <10ns into 50 ohm
Pulser WidthFixed 100ns 30 – 250 ns linked to filter band
Pulser Repetition FrequencySelectable 5 – 1000Hz.
DisplayColour transflective TFT Display area 111.4 x 83.5mm (4.39 x 3.29 in) A-scan area 315 x 200 max Variable brightness Sunlight viewable
8 Selectable colour schemes for A-scan & menu
Screen Update Rate50 or 60Hz
RectificationFull Wave, positive, negative, RF
Frequency BandsBroadband 1 – 10 Mhz (-6dB)
Vertical Linearity1% full screen height
Amplifier Linearity- 0.1 dB
Horizontal Linearity0.33% full screen width
Reject50% Suppressive LED warning light when activated
Waveform SmoothingProduces a smooth signal envelope
Unitsmm, inches or time
AGCAutomatic Gain Control sets selected echo to a user defined level (10-90%)
DACUp to 10 points may be entered and used to digitally draw a DAC curve Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes
AWSAutomatic defect sizing in accordance with AWS D1.1 Structural Welding Code
APIAutomatic defect sizing in accordance with API 5UE
AVG/DGSAutomatic defect sizing using probe data
TCGTime corrected Gain 40dB dynamic range, 30dB per microsecond, up to 10 points for curve definition.
A-scan Memory800 waveforms
Panel Memory100 stores for calibration setting
Thickness Logging8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets Transferable to Excel using optional SDMS
Auto-CalAutomatic calibration with two echoes
Reference WaveformRecalled waveform can be shown in a different colour to live waveform for direct comparison
Display FreezeHolds current waveform on screen
Peak MemoryFor echo-dynamic pattern capture
Front USBFor connection to PC, keyboard and printer
OutputsSerial Interface, composite video (PAL & NTSC), analogue output for amplitude and distance updated at PRF rate Transmitter sync output
BatteryLithium Ion 14.4V 5.0 ampere hours Up to 16 hours, indication of battery charge. Recharge time 4 hours. Mains pack option
Charger100 – 240 VAC, 50-60Hz
EnvironmentalMeets IP67
Temperature RangeOperating -10o C to 55o C (14o F – 131o F) Storage -40o C to 75o C (-40o F to 167o F)
Size256 x 145 x 145mm (10 x 5.7 x 5.7 in.)
Weight2.5Kg (5.5 lbs) with battery
The 250S is the top of the range instrument in this series. It includes all the software features of the 150S, combined with a narrow band amplifier and TCG, for more demanding ultrasonic applications. The square wave ActiveEdge pulser automatically optimizes for each filter band selected, ensuring maximum performance.
$1,400.00
SONATEST SITESCAN 250S ULTRASONIC FLAW DETECTOR SALE!! (SONATEST SITESCAN 250S ULTRASONIC FLAW DETECTOR)

All instruments are field upgradable, reducing your downtime and increasing your working flexibility, rising to the challenge of your application. Sonatest are proud to offer some of the most powerful and rugged UT flaw detectors on the market with our product development always focussed on operator and end user requirements.

The 250S is the top of the range instrument in this series. It includes all the software features of the 150S, combined with a narrow band amplifier and TCG, for more demanding ultrasonic applications. The square wave ActiveEdge pulser automatically optimizes for each filter band selected, ensuring maximum performance.

Features

  • Sunlight viewable, color trans-reflective TFD display
  • Easy-to-use, user friendly operating system
  • DAC, AWS, API and DGS (AVG) included at no extra cost!
  • Digital flaw location (thickness and angle beam trig.)
  • Curve correction
  • Full screen A-Scan display
  • Waterproof - IP67 case
  • Shockproof case
  • 15 hour battery life!
  • BNC or Lemo Connectors - your choice
  • Wide band amplifier
  • Affordable price
  • Thickness Data Logger (8,000 readings)
  • Auto-Cal for fast set-up
  • 2 gates
  • Depth/E-E/Trig measurement
  • Auto-Cal
  • DAC/AWS/AVG
  • 8000 thickness readings storage capacity

Applications

Ideal for the following applications: Casting Inspection, Corrosion Inspection, Crack Detection, General Flaw Detection, Maintenance, Pitting Detection, Welding Inspection.

Specifications:

Test Range0-5mm (0.2in) up to 0-10000 (400in) at steel velocity. Variable in sequence, 10mm or 1mm
Velocity1000 – 9999 m/s
Probe Zero0 – 999.999 us
Delay0 – 10000m at steel velocity in 0.05 steps (0 – 400 in 0.002 in steps)
Gain0 – 110dB in 0.5, 1, 2, 6, 10, 14, 20 dB steps
Test ModesPulse echo and transmit-receive
GatesTwo fully independent gates for echo monitoring and thickness measurement. Start and width adjustable over full range of unit, amplitude variable from 0 to 100% FSH. Bar presentation. Positive or negative triggering for each gate with audible and visual alarms.
Measurement Modes
DepthDepth and amplitude of signal in gate
Echo – EchoEcho – Echo distance, automatic gate 2 position
Gate to GateEcho – Echo distance, manual gate 2 position
TrigTrigonometric display of beam path, depth and surface distance Calculation of skip depth and curve surface compensation, X-offset for transducer
T-MinHolds minimum thickness in depth mode
Pulser Voltage-200 volt peak amplitude, rise/fall time <10ns into 50 ohm
Pulser WidthFixed 100ns 30 – 250 ns linked to filter band
Pulser Repetition FrequencySelectable 5 – 1000Hz.
DisplayColour transflective TFT Display area 111.4 x 83.5mm (4.39 x 3.29 in) A-scan area 315 x 200 max Variable brightness Sunlight viewable
8 Selectable colour schemes for A-scan & menu
Screen Update Rate50 or 60Hz
RectificationFull Wave, positive, negative, RF
Frequency BandsBroadband 1 – 10 Mhz (-6dB)
Vertical Linearity1% full screen height
Amplifier Linearity- 0.1 dB
Horizontal Linearity0.33% full screen width
Reject50% Suppressive LED warning light when activated
Waveform SmoothingProduces a smooth signal envelope
Unitsmm, inches or time
AGCAutomatic Gain Control sets selected echo to a user defined level (10-90%)
DACUp to 10 points may be entered and used to digitally draw a DAC curve Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes
AWSAutomatic defect sizing in accordance with AWS D1.1 Structural Welding Code
APIAutomatic defect sizing in accordance with API 5UE
AVG/DGSAutomatic defect sizing using probe data
TCGTime corrected Gain 40dB dynamic range, 30dB per microsecond, up to 10 points for curve definition.
A-scan Memory800 waveforms
Panel Memory100 stores for calibration setting
Thickness Logging8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets Transferable to Excel using optional SDMS
Auto-CalAutomatic calibration with two echoes
Reference WaveformRecalled waveform can be shown in a different colour to live waveform for direct comparison
Display FreezeHolds current waveform on screen
Peak MemoryFor echo-dynamic pattern capture
Front USBFor connection to PC, keyboard and printer
OutputsSerial Interface, composite video (PAL & NTSC), analogue output for amplitude and distance updated at PRF rate Transmitter sync output
BatteryLithium Ion 14.4V 5.0 ampere hours Up to 16 hours, indication of battery charge. Recharge time 4 hours. Mains pack option
Charger100 – 240 VAC, 50-60Hz
EnvironmentalMeets IP67
Temperature RangeOperating -10o C to 55o C (14o F – 131o F) Storage -40o C to 75o C (-40o F to 167o F)
Size256 x 145 x 145mm (10 x 5.7 x 5.7 in.)
Weight2.5Kg (5.5 lbs) with battery
Sonatest's comprehensive range of portable ultrasonic flaw detectors provide the end user with unrivalled flexibility and performance in the field of Non Destructive Flaw detection.
$3,000.00
NEW SONATEST SITESCAN D-50 ULTRASONIC FLAW DETECTOR SALE!! (SONATEST SITESCAN D-50 ULTRASONIC FLAW DETECTOR)

The Sitescan D-50 offers the end user an entry level broadband flaw detector in the popular and portable casing of the established D-Series; with a full VGA display, a 50nS (Spike) 200V, a Pulser 0.5dB gain resolution and an optional rubber boot.

High levels of near surface resolution, penetrating power and excellent signal to noise ratio are key functions in the Sitescan range. The D-50 has a color transflective VGA display, providing high visibility in any lighting condition and the enhanced user interface and full A-Scan display is available at the touch of a button. The D-50 enclosure is constructed using impact resistant materials and is designed to meet IP67 standards, offering excellent water resistance and harsh conditions.  Typical applications are Weld Fabrication, Corrosion Detection, Forgings & Castings and general UT inspection.

Features

  • Customizable & Intuitive Menus
  • Split DAC / DGS (AVG)
  • Angle Measurement Mode
  • Configurable on-board software
  • Field upgradeable
  • Encoded B-Scan
  • A-Scan Fade
  • 4 GB on-board memory
  • USB Interface for PC import/export
  • Video Output for training

B-Scan
The Corrosion Software option includes the B-Scan display function which shows the cross section of the material based on its wall thickness. The B-Scan has selected update rates from 3 to 10 times per second, and can be stored with the thickness readings and transferred to the PC via UTLity.

Angle Measurement Mode
Quick accurate measurement of beam profile is made easy by the new angle measurement mode. The instrument automatically converts the indication from a side drilled hole of known diameter and depth to the angle of the reflector from the beam exit point. Using the built-in peak detection mode, as shown, the beam profile for any transducer can be confirmed in moments.

DGS (AVG)
AVG/DGS software can be configured for any transducer and gives repeatable sizing of flaws with direct readout of Equivalent Reflector Size. The visible ERS curve can be adjusted to display the desired acceptance level and used to trigger the alarm and measurement reading.

AWS
With this option enabled, measurements of Indication Level (IL), Attenuation Factor (AF), and Indication Rating (IR) are calculated and displayed in accordance with AWS D1.1.

UTLity (Data Management Software)
UTLity software provides everything you need to manage your inspection data. The Standard version is FREE with every instrument and gives you the ability to view, move and manage Calibrations, A-Scans, B-Scans and Thickness Logs both on the instrument and on your PC. With UTLity you can also create customized inspection report templates, cut and paste information to other applications, and create printable pdf documents.

  • Load, store, manage files both on the PC and on a connected flaw detector.
  • Save, analyze, color code & export Thickness logging data to spreadsheets / asset management software.
  • Update the Flaw Detector Software & Firmware as and when updates become available on our website.

 

Sitescan D-50 Standard Kit

  • D-50 Digital Flaw Detector
  • Battery, Charger, Charger mains cable
  • User Guide & Calibration Certificate
  • Certificate of Conformance
  • Carry Bag
  • UTLity & USB Cable
  • Display Window Cover
  • Ultrasonic Couplant

Specifications:

Test Range:0.4" to 394" (1mm to 10,000mm)
Velocity:1,000 - 10,000 m/s continuously variable
Probe Zero:0 to 1,000 μs
Delay:400" (0 - 10,000m) in steel at 5930m/s (19455f/s)
Gain:0 to 110dB adjustable in 0.5, 1, 2, 6, 10, 14 and 20 dB steps
Test Modes:Pulse Echo and transmit/receive
Pulser:200V fixed. 50nS square wave. Rise/Fall times <15nS into 50R load.
Damping:50 and 400 ohm damping selectable
P.R.F.:Adjustable 5Hz to 1kHz. External sync also available.
Screen Update Rate:60Hz
Rectification:RF, Fill wave, ve half-wave and -ve half-wave.
Frequency Range:1.0MHz to 14Mhz (-3dB)
System Linearity:Vertical = 0.5% Full Screen Height (FSH).
Horizontal = /- 0.2% Trace Full Screen Width (FSW).
Reject (Selectable):Up to 80% Linear reject (removes baseline noise without affecting indication amplitude)
or
Up to 50% Suppressive reject (increase zero offset and reduces amplitude of all echoes).
LED Warning when active.
Units:Imperial (in), Metric (mm)
Display:Color Transflective VGA (640 x 480) TFT
Display Area: 4.57" x 3.43" (116.16 x 87.2mm)
A-Scan Area: 400 x 510 pixels (normal), 460 x 620 (FS)
Colors: 9 color palette with variable brightness
Gate Monitor:Two independent gates for measurement and monitoring. Start and width fully adjustable over the entire range of the instrument. Levels adjustable from 0% to 100%, positive or negative triggering on each gate with audible & visual alarms. Gate resolution is 5nS.
Zoom:Expands range and delay to cover the area set by Gate 1 start & width controls.
AGC:Automatic Gain Control automatically sets the signal in Gate 1 to a level between 10% and 90% FSH, tolerance between 5% and 20%.
Measurement Modes:
Mode 1:Signal Monitor, Gate Alarms can be active but no measurements are displayed.
Mode 2:Depth and amplitude of first signal in gate.
Mode 3:Echo-Echo distance measurements.
Mode 4:Trigonometric display of beam-path, surface distance (including X-offset) and depth of indication from the inspection surface together with echo amplitude. Curved surface correction can be applied for convex and concave surfaces. Half-skip can be indicated on screen.
Mode 5:Gate to Gate distance measurement
Mode 6:Flank to Flank
Mode 7:Beam Angle, calculated from beampath, hole radius and hole center depth
Measurement Display:Live display and updates on screen at 10 times per second. Large display of a single measurement available.
Waveform Smoothing Select from:
  1. None (both min and max values are displayed in the A-Scan)
  2. Fill (Min values set to baseline value, produces a solid A-Scan)
  3. Smooth (min values ignored, produces a clear outline)
Auto-Cal:Provides automatic calculation of velocity and probe zero from 2 reference echoes. Automatic calibration with two echoes.
Reference Waveform:Displays a previously stored A-log in a color different from the active display: enabling a quick visual check of the differences.
Clock:Built-in battery backed RTC keeps time and date. Visible on the status line, always stored with Panels, A-logs, etc.
Internal Memory:4GB storage available for A-Scans, panels, T-logs, B-logs, etc. 450,000 Panels, 200,000 A-Logs, 300,000 B-Charts, 440,000 T-Logs.
Active Peak Memory:Retains all A-Scans on screen for echo-dynamic pattern analysis, with the active A-Scan displayed in a separate color.
Notes:Alphanumeric labelling for panel stores, A-logs, B-logs, etc.
Display Freeze:Hold the current waveform on screen for off-line processing.
Help Key:Shows software and hardware information.
Language Support:Multiple languages are selectable from a list including:
English, French, Spanish, Russian, Chinese (Modern). Others are available on request.
Encoder Connection:Lemo min 4-pin connector (D50).
Video Output:Factory Option on D-50.
USB Connection:Internal storage shown as Memory Device.
Transducer Sockets:BNC or Lemo (factory option)
Power:Lithium Ion 14.4V battery pack. Typically 12 hours for D-50. Indication of battery charge status. Recharge time 3-4 hrs. Battery can be charged separately. Mains pack optional.
Charger:100-240 VAC, 50-60 Hz
Environmental:Case sealed to IP67
Temperature:

Operating: 14° to 131°F (-10° to 55°C)
Storage: -40° to 167°F (-40° to 75°C)

Size:6.77" x 9.37" x 2.75" (172 x 238 x 70mm) (HxWxD)
Weight:3.7 lbs. (1.7 kg) with battery.
Warranty:2 year
Extended Warranty:Sonacover - extended 5 year warranty, including 4 calibrations
Calibration Standard:EN12668-1:2020 (Detailed Specification available upon request)
Standards:Vibration to 514.5-5 Proc 1 Annex C Fig 6
Shock 516.5 Proc 1 15g/6ms
Explosive atmospheres - MIL-STD 810G
Methos 511.5, Procedure 1
Sonatest Sitescan Flaw Detectors have always meant highly reliable, technician focused flaw detection equipment and this model builds on that tradition.
$1,400.00
NEW SONATEST SITESCAN 500S ULTRASONIC FLAW DETECTOR SALE!! (SONATEST SITESCAN 500S ULTRASONIC FLAW DETECTOR)

The Sitescan 500s offers the end user an entry level broad band flaw detector with full VGA display, sync and proportional outputs and a 50nS (Spike) 200V Pulser. High levels of near surface resolution, penetrating power and excellent signal to noise ratio are key functions in the Sitescan range. 

The 500S has a color transflective VGA display, providing high visibility in any lighting condition and the enhanced user interface and full A-Scan display is available at the touch of a button. The 500S enclosure is constructed using impact resistant materials and is designed to meet IP67 standards, offering excellent water resistance and harsh conditions. Typical applications are Weld Fabrication, Corrosion Detection, Forgings & Castings and general UT inspection.

Features:

  • Customizable & Intuitive Menus
  • Split DAC / DGS (AVG)
  • Angle Measurement Mode
  • Configurable on-board software
  • Field upgradeable
  • Encoded B-Scan
  • A-Scan Fade
  • 4 GB on-board memory
  • USB Interface for PC import/export
  • Video Output for training

B-Scan
The Corrosion Software option includes the B-Scan display function which shows the cross section of the material based on its wall thickness. The B-Scan has selected update rates from 3 to 10 times per second, and can be stored with the thickness readings and transferred to the PC via UTLity.

Angle Measurement Mode
Quick accurate measurement of beam profile is made easy by the new angle measurement mode. The instrument automatically converts the indication from a side drilled hole of known diameter and depth to the angle of the reflector from the beam exit point. Using the built-in peak detection mode, as shown, the beam profile for any transducer can be confirmed in moments.

DGS (AVG)
AVG/DGS software can be configured for any transducer and gives repeatable sizing of flaws with direct readout of Equivalent Reflector Size. The visible ERS curve can be adjusted to display the desired acceptance level and used to trigger the alarm and measurement reading.

AWS
With this option enabled, measurements of Indication Level (IL), Attenuation Factor (AF), and Indication Rating (IR) are calculated and displayed in accordance with AWS D1.1.

UTLity (Data Management Software)
UTLity software provides everything you need to manage your inspection data. The Standard version is FREE with every instrument and gives you the ability to view, move and manage Calibrations, A-Scans, B-Scans and Thickness Logs both on the instrument and on your PC. With UTLity you can also create customized inspection report templates, cut and paste information to other applications, and create printable pdf documents.

  • Load, store, manage files both on the PC and on a connected flaw detector.
  • Save, analyze, color code & export Thickness logging data to spreadsheets / asset management software.
  • Update the Flaw Detector Software & Firmware as and when updates become available on our website.

Sitescan 500 Standard Kit:

  • Sitescan 500S Digital Flaw Detector
  • Battery, Charger, Charger mains cable
  • User Guide & Calibration Certificate
  • Certificate of Conformance
  • Carry Bag
  • UTLity & USB cable
  • Display Window Cover
  • Ultrasonic Couplant

Specifications:

Test Range:0.4" to 394" (1mm to 10,000mm)
Velocity:1,000 - 10,000 m/s continuously variable
Probe Zero:0 to 1,000 μs
Delay:400" (0 - 10,000m) in steel at 5930m/s (19455f/s)
Gain:0 to 110dB adjustable in 0.5, 1, 2, 6, 10, 14 and 20 dB steps
Test Modes:Pulse Echo and transmit/receive
Pulser:200V fixed. 50nS square wave. Rise/Fall times <15nS into 50R load.
Damping:50 and 400 ohm damping selectable
P.R.F.:Adjustable 5Hz to 1kHz. External sync also available.
Screen Update Rate:60Hz
Rectification:RF, Fill wave, ve half-wave and -ve half-wave.
Frequency Range:1.0MHz to 14Mhz (-3dB)
System Linearity:Vertical = 0.5% Full Screen Height (FSH).
Horizontal = /- 0.2% Trace Full Screen Width (FSW).
Reject (Selectable):Up to 80% Linear reject (removes baseline noise without affecting indication amplitude)
or
Up to 50% Suppressive reject (increase zero offset and reduces amplitude of all echoes).
LED Warning when active.
Units:Imperial (in), Metric (mm)
Display:Color Transflective VGA (640 x 480) TFT
Display Area: 4.57" x 3.43" (116.16 x 87.2mm)
A-Scan Area: 400 x 510 pixels (normal), 460 x 620 (FS)
Colors: 9 color palette with variable brightness
Gate Monitor:Two independent gates for measurement and monitoring. Start and width fully adjustable over the entire range of the instrument. Levels adjustable from 0% to 100%, positive or negative triggering on each gate with audible & visual alarms. Gate resolution is 5nS.
Zoom:Expands range and delay to cover the area set by Gate 1 start & width controls.
AGC:Automatic Gain Control automatically sets the signal in Gate 1 to a level between 10% and 90% FSH, tolerance between 5% and 20%.
Measurement Modes:
Mode 1:Signal Monitor, Gate Alarms can be active but no measurements are displayed.
Mode 2:Depth and amplitude of first signal in gate.
Mode 3:Echo-Echo distance measurements.
Mode 4:Trigonometric display of beam-path, surface distance (including X-offset) and depth of indication from the inspection surface together with echo amplitude. Curved surface correction can be applied for convex and concave surfaces. Half-skip can be indicated on screen.
Mode 5:Gate to Gate distance measurement
Mode 6:Flank to Flank
Mode 7:Beam Angle, calculated from beampath, hole radius and hole center depth
Measurement Display:Live display and updates on screen at 10 times per second. Large display of a single measurement available.
Waveform Smoothing Select from:
  1. None (both min and max values are displayed in the A-Scan)
  2. Fill (Min values set to baseline value, produces a solid A-Scan)
  3. Smooth (min values ignored, produces a clear outline)
Sonatest Sitescan Flaw Detectors have always meant highly reliable, technician focused and this range continues this tradition.
$1,900.00
USED SONATEST WAVE DIGITAL ULTRASONIC SALE!! (SONATEST WAVE DIGITAL ULTRASONIC)

Its wifi capability allows you to access it anywhere in the field, eases data transfer, application installation and manages calibration date and software version.

Features:
Interactive Scan
Mitigate false calls with the new WAVE Interactive Scan Plan. The WAVE Interactive Scan Plan has been developed to ease diagnostics on the inspected part. The scan plan can reproduce complex geometries such as curved surfaces and T-Joints. Combined with a real-time Raytracer, this unique feature facilitates the distinction between a real flaw and a geometrical indication, thus avoiding unnecessary repair.

Import Custom Parts
The WAVE can import a custom part in the interactive scan plan. This feature enables the user to visualize sound propagation in complex geometries. All the benefit of the Interactive Scan Plan remains with the addition of removing the limitations that come with predefine parts.

WAVE Application Concept
The WAVE Application Concept combines conformity and performance allowing the operator to customize the user interface according to his/her specific procedure. A lean manufacturing philosophy means less training and long-term financial benefits. The intuitive user interface with an easy-to-use display will guarantee work flow optimization as well as preventing potential operational errors.

WAVE UTouch Technology
The Sonatest UTouch Technology allows your instrument to operate in the same way as a mobile phone. Combined with rugged components and an intelligent algorithm which makes the distinction between couplant and finger, the Sonatest WAVE is the first true industrial touch-screen device on the market.

WAVE Companion
The WAVE Companion software offers an environment where dedicated predefined applications setups are created and uploaded to WAVE platform. Once created, the new app setups are transferred and installed on the unit via wired (USB-C / ethernet) or wireless network. The default app allows access to all functionalities and features where the user can modify the entire settings.

Specifications:

Wave ConceptWave ApplicationsUp to 50 Apps
Wave UTouch TechnologyP-CAP Multi Touch
Interactive Scan PlanCrown and Root GeometriesYes
Weld OverlayYes
TKY / Nozzle / Flange GeometriesYes
Curved SurfaceYes
Live RaytracerYes
Projected A-ScanYes
True Depth on Complex ShapesYes
Custom CAD ImportYes
MeasurementsGates4
IFTYes
DAC / Split DACStandard
TCGStandard
AVG / DGSStandard
AWSStandard
APIStandard
Curved Surface Correction (CSC)Standard
TKY and Complex ShapesStandard
TransmitterPRF1500 Hz
Pulser (Voltage)100 to 500 V
ReceiverGain Range110 dB
Bandwidth0.25 to 30 MHz
Filters26 filters
Signal AveragingYes
GeneralBattery Life10 Hours
Display Size (Resolution)7" wide (1024 x 600)
Dimensions8.7" x 6.8" x 2.5" (222 x 174 x 63mm)
Weight3.7 lbs. (1.7 kg)
IP RatingDesigned for IP67
Operating Temperature14°F to 113°F (-10°C to 45°C)
Wifi (embedded)Yes
The WAVE interactive flaw detector integrates the latest technologies available in order to create a revolution in the ultrasonic non-destructive testing equipment market.
$1,600.00
NEW SONATEST WAVE DIGITAL ULTRASONIC FLAW DETECTOR SALE!! (SONATEST WAVE DIGITAL ULTRASONIC FLAW DETECTOR)

Its wifi capability allows you to access it anywhere in the field, eases data transfer, application installation and manages calibration date and software version.

Features:
Interactive Scan
Mitigate false calls with the new WAVE Interactive Scan Plan. The WAVE Interactive Scan Plan has been developed to ease diagnostics on the inspected part. The scan plan can reproduce complex geometries such as curved surfaces and T-Joints. Combined with a real-time Raytracer, this unique feature facilitates the distinction between a real flaw and a geometrical indication, thus avoiding unnecessary repair.

Import Custom Parts
The WAVE can import a custom part in the interactive scan plan. This feature enables the user to visualize sound propagation in complex geometries. All the benefit of the Interactive Scan Plan remains with the addition of removing the limitations that come with predefine parts.

WAVE Application Concept
The WAVE Application Concept combines conformity and performance allowing the operator to customize the user interface according to his/her specific procedure. A lean manufacturing philosophy means less training and long-term financial benefits. The intuitive user interface with an easy-to-use display will guarantee work flow optimization as well as preventing potential operational errors.

WAVE UTouch Technology
The Sonatest UTouch Technology allows your instrument to operate in the same way as a mobile phone. Combined with rugged components and an intelligent algorithm which makes the distinction between couplant and finger, the Sonatest WAVE is the first true industrial touch-screen device on the market.

WAVE Companion
The WAVE Companion software offers an environment where dedicated predefined applications setups are created and uploaded to WAVE platform. Once created, the new app setups are transferred and installed on the unit via wired (USB-C / ethernet) or wireless network. The default app allows access to all functionalities and features where the user can modify the entire settings.

Kit Includes:

  • WAVE Interactive Ultrasonic Flaw Detector
  • BNC Connectors, Battery and Charger (with outlet cable)
  • Ultrasonic Couplant
  • Ethernet Adapter & Cable
  • User Manual & Quick Start Guide
  • Certificate of Calibration and Conformance
  • Carrying Case

Specifications:

Wave ConceptWave ApplicationsUp to 50 Apps
Wave UTouch TechnologyP-CAP Multi Touch
Interactive Scan PlanCrown and Root GeometriesYes
Weld OverlayYes
TKY / Nozzle / Flange GeometriesYes
Curved SurfaceYes
Live RaytracerYes
Projected A-ScanYes
True Depth on Complex ShapesYes
Custom CAD ImportYes
MeasurementsGates4
IFTYes
DAC / Split DACStandard
TCGStandard
AVG / DGSStandard
AWSStandard
APIStandard
Curved Surface Correction (CSC)Standard
TKY and Complex ShapesStandard
TransmitterPRF1500 Hz
Pulser (Voltage)100 to 500 V
ReceiverGain Range110 dB
Bandwidth0.25 to 30 MHz
Filters26 filters
Signal AveragingYes
GeneralBattery Life10 Hours
Display Size (Resolution)7" wide (1024 x 600)
Dimensions8.7" x 6.8" x 2.5" (222 x 174 x 63mm)
Weight3.7 lbs. (1.7 kg)
IP RatingDesigned for IP67
Operating Temperature14°F to 113°F (-10°C to 45°C)
Wifi (embedded)Yes
Introducing WAVE by Sonatest. It integrates the latest technologies available in order to create a revolution in the ultrasonic non-destructive testing equipment market. Not only is it innovative, but the customizable interface also optimizes the daily workflow, and a unique and embedded interactive scan plan, with ray-tracing capability and simulation tools, consolidates your results.
$3,000.00
SONATEST RAILSCAN 125 ULTRASONIC FLAW DETECTOR SALE!! (SONATEST RAILSCAN 125 ULTRASONIC FLAW DETECTOR)

Developed using cutting edge technologies the new Railscan 125 has been developed with the user and application environment in mind, meeting the Network Rail standard NR/SP/TRK/005 for Rail Testing Portable Ultrasonic Equipment.

Rugged, waterproof construction combined with superior battery life render this unit as being ideally designed for rail testing applications and harsh working environments. The transflective colour display is daylight viewable and now supports a larger display area, which is expandable for full screen viewing.

Software development has resulted in a new user orientated menu navigation system, broken down into four key areas: calibration, measurement, utilities and memory. The subtly redesigned user interface allows for faster parameter changes, providing unique Help keys for all functions and above all ease of use. With improved overall performance, more robust casing and advanced software features the results will speak for themselves.

For more than 30 years the Railscan name has meant exceptional performance with class-leading design within the rail infrastructure market. The new Sonatest RailScan 125 flaw detector delivers a higher level of nearsurface resolution and penetrating power into a portable and rugged enclosure. It also offers more measuring capabilities than its predecessors for rail applications such as:

  • rail walking stick inspection solutions
  • rail manual defect sizing
  • rail bottom depth measurements

Features:
Sonatest Ultrasonic Assurance of Quality
Based on 60 years of experience, the Railscan 125 is powered by high-end software and electronic technologies:

  • Narrow Band amplifiers 2 MHz & 5 MHz
  • Up to 3 gates for complete inspection solutions
  • Encoder driven for Rail-Thickness auto-logging
  • Best signal-to-noise ratio on the market (SNR)

The Reference for Railway Companies
Approved by Network Rail, the owner and infrastructure manager of most of the rail newtwork in England, Scotland and Wales, the Railscan 125 takes part in the quality control procedures to ensure integrity assessment of the UK railway network. 

High Visibility Display
For any flaw detector, the display is a crucial element. The Railscan 125 has a colour transflective VGA display and maximum readability is achieved, even in direct sunlight conditions, through adjustable brightness and the choice of 9 colour palettes, including a black-on-white LCD emulation mode. The Full-Screen mode maximises the A-scan area to improve readability further whilst testing and its fast response and peak capture functionality ensure any indications clearly displayed, even if it only appears for one cycle of the 1 KHz PRF.

High Performance with Total Control
The acknowledged ease of use of the previous Railscan generation has been enhanced with the menu navigation key, providing easy access to functions. The menu structure has been designed to guide the user through their task with operation quickly becoming second nature.

Robust & Reliable
Sonatest’s reputation for robust design and proven reliability is an important aspect of our flaw detector ownership. Downtime is expensive and should be minimised to ensure maximum productivity. The Railscan 125 is constructed to high standards using a highdensity enclosure that is sealed to IP67, giving an excellent water resistance so it can withstand the railways’ harsh environments in which operators work. The Railscan 125 comes with a 2 year warranty, extendable to 5 years with Sonacover, and a worldwide service network.

UT-Lity Data Management Software
UT-Lity software provides everything you need to manage your inspection data, configuration files and software updates. 

  • Load, store, manage files both on the PC and on a connected flaw detector.
  • Save, analyse, colour code and export thickness logging data to spreadsheets/asset management software.
  • Update the Flaw Detector Firmware as and when updates become available on Sonatest website.
Building on the new range of Digital Ultrasonic Flaw Detectors recently launched by Sonatest Ltd, the new Railscan 125 has been developed specifically for use in rail testing market and is walking stick compatible.
$1,000.00
USED SONATEST VEO3 PHASED ARRAY FLAW DETECTOR SALE!! (SONATEST VEO3 PHASED ARRAY FLAW DETECTOR)

Veo3 by Sonatest is the third generation of the Phased Array instruments line. The most improvement of this instrument is that uses 3 complementary inspection techniques simultaneously. Techniques used by Veo 3 are PAUT (Phased Array Ultrasonic Testing), TFM (Total Focusing Method) and TOFD (Time of Flight Diffraction). These advanced technologies allow real-time capabilities to this portable instrument.

The Veo3 has all the flexibility necessary to help you solve challenging applications. Its unique architecture can generate up to six live TFM scans, produced from multiple FMC sources on different probes. This allows the end-users to focus where it matters, solving the most difficult inspections. 

All of the data received during Full Matrix Capture (FMC) scanning can be recorded on the Veo3. As a result, further detailed analysis can be performed including comparison with previous inspection data to identify trends and flaw/corrosion growth rates. The Sonatest UTStudio software package has extensive capabilities to assist the inspector/expert or alternatively the data can be exported for analysis using other algorithms. Again, Sonatest provides the tools necessary beyond just the basic inspection.

The Veo3 phased array flaw detector takes the advantages of  the earlier Sonatest units that you have come to know and added some significant new features.  Fitted with a state-of-the-art PCAP touch panel, the now legendary user interface is even better. But what makes Veo3 really stand out, is its unique real-time multi-scan/multi-technique capabilities. Simultaneous TFM, PA and TOFD views are now possible.


Features:
Superior Digital Technology
The Veo3 offers superior data throughput and unsurpassed computational capacity. It delivers fast and accurate results using an impressive 32 channel PA beamformer that provides exceptional SNR, using enhanced digital signal processing. Data file size is not a concern for the Veo3 thanks to its 64-bit Linux operating system because it can count on a fast 128GB SSD memory capacity allowing you to record huge amounts of information in a single acquisition file. With its advanced technology the Veo3 is unique in allowing real-time multi-scan/multi-technique capabilities. Simultaneous TFM, PA and TOFD views are now possible.

Intuitive Menus & Workflow
The intuitive menu system is application and workflow driven, with set up and operation swiftly becoming second nature. Integrated help and wizards guide the user through scan set up whilst optimization tips ensure the Veo3 always performs at the highest level. Fast and efficient wizards for sound velocity; wedge delay, TCG, DAC, TOFD setup and encoder calibration are all provided as standard. The inspection plan shows the operator in 3D where probes are positioned on the test part, simplifying the inspection set up and providing an inspection reference for reporting. Using the latest computer technology, data can be permanently recorded for processing and report generation. All adjustments to focal laws are instantaneous, with angle resolution to 0.1° and up to 1024 focal laws without loss of performance.

FMC / TFM
With its unique architecture the Veo3 can generate up to six live TFM scans, produced from multiple FMC sources on different probes, and also generates TFM images of up to 500k pixels with a maximum resolution of 100 pixel per mm without limiting the number of pixel per axis. All of the data received during Full Matrix Capture (FMC) scanning can be recorded on the Veo3. As a result, further detailed analysis can be performed including comparison with previous inspection data to identify trends and flaw/corrosion growth rates. The Veo3 can combine up to 4 live TFM modes. As known as TFMi, the details of the defects have never been so close to the reality. That imaging scan provides a high-precision height assessment and an improved shape accuracy compared to conventional PA inspections. The ability to characterize the type of defects is now effortless. This technique has indeed demonstrated superior results on weld analysis.

Standard Kit Includes:

  • Veo3 Phased Array Flaw Detector
  • 2 Lithium Ion Batteries
  • External USB Stick 8GB G3
  • Ruler
  • PA 15V 4A AC/DC Power Adapter
  • Quick Start Guide - Hard Copy
  • User Manual & Quick Start Guide USB
  • Carry Strap
  • Transport Case
  • Screen Protector (Clear or Tinted)
  • UTstudio Standard License

Specifications:

GeneralPhased Array (32:128PR)UT-TOFD (2PR)Live TFM
Multi-scan QuantityUp to 8 scansUp to 2 scans (UT & TOFD)Up to 6 scans
Pulsers/Receivers32:128PR2PR (4 connectors)Up to 64 elements probe
Gain Range80dB100dB80dB
Sampling Frequency125 MHz @ 12-Bit50/100/200 MHz @ 10-Bit125 MHz @ 12-Bit (processing 16-Bit)
System Bandwidth0.2 to 23 MHz0.2 to 18 MHz0.2 to 23 MHz
Max Pulse Rate Frequency50,000 Hz20,000 Hz50,000 Hz
Pulse Voltage100-50V ActiveEdge400-100V ActiveEdge100-50V ActiveEdge
Focusing ModeNatural or Constant Depth/Path/OffsetN/AFocusing in all points TFM & two TFM Intermode methods
S-Scan ResolutionUp to 0.1°N/ADown to 0.01mm
L-Scan ResolutionDown to 1 element or Double ResolutionN/ADown to 0.01mm
Max PA Beams (focal laws)Up to 1024 beamsN/AUp to 500,000 pixels
Tools - Measurements and WizardEXTRACTION BOX, 4 gates/A-Scan, TCG, DAC/Split-DAC4 gates/A-Scan, TCG, DGS/Split DGS, DAC/Split-DAC12 TFM algorithms, Up to 4 modes per TFMiTM, EXTRACTION BOX, 4 gates, Velocity, TCG, Amplitude fidelity, up to 20 cursors/view
Onboard Scan Plan ToolsOnboard 3D live rendering
Onboard Reporting ToolsPDF auto-report, Export data to CSV file, Save screen capture
Onboard PDF Reader IntegratedAbility to load and read and PDF documents
Online Help CalibrationACTIVE help genius for parameter optimization procedures, reports
StandardsISO18563 (EN16392) & EN12668
Operating Time6 hours (hot swappable batteries)
Power InputAC 110V/240V @ 50Hz/60Hz
Unit Dimensions4.52" x 8.6" 8.8" (115 x 220 x 225mm)
Weight11 lbs. (5.1 kg) no battery, 460 g
Environmental RatingDesigned for: IP66
The Veo3 multi-techniques allow inspectors to keep inspecting as they always have, with no need to change their current workflow and by doing so, users can benefit from the additional resolution and sizing performance of TFM while carrying out an already approved, trusted and reliable procedure.
$3,400.00
NEW SONATEST VEO3 PHASED ARRAY FLAW DETECTOR SALE!! (SONATEST VEO3 PHASED ARRAY FLAW DETECTOR)

The Veo3 multi-techniques allow inspectors to keep inspecting as they always have, with no need to change their current workflow and by doing so, users can benefit from the additional resolution and sizing performance of TFM while carrying out an already approved, trusted and reliable procedure.

Veo3 by Sonatest is the third generation of the Phased Array instruments line. The most improvement of this instrument is that uses 3 complementary inspection techniques simultaneously. Techniques used by Veo 3 are PAUT (Phased Array Ultrasonic Testing), TFM (Total Focusing Method) and TOFD (Time of Flight Diffraction). These advanced technologies allow real-time capabilities to this portable instrument.

The Veo3 has all the flexibility necessary to help you solve challenging applications. Its unique architecture can generate up to six live TFM scans, produced from multiple FMC sources on different probes. This allows the end-users to focus where it matters, solving the most difficult inspections. 

All of the data received during Full Matrix Capture (FMC) scanning can be recorded on the Veo3. As a result, further detailed analysis can be performed including comparison with previous inspection data to identify trends and flaw/corrosion growth rates. The Sonatest UTStudio software package has extensive capabilities to assist the inspector/expert or alternatively the data can be exported for analysis using other algorithms. Again, Sonatest provides the tools necessary beyond just the basic inspection.

The Veo3 phased array flaw detector takes the advantages of  the earlier Sonatest units that you have come to know and added some significant new features.  Fitted with a state-of-the-art PCAP touch panel, the now legendary user interface is even better. But what makes Veo3 really stand out, is its unique real-time multi-scan/multi-technique capabilities. Simultaneous TFM, PA and TOFD views are now possible.


Features:
Superior Digital Technology
The Veo3 offers superior data throughput and unsurpassed computational capacity. It delivers fast and accurate results using an impressive 32 channel PA beamformer that provides exceptional SNR, using enhanced digital signal processing. Data file size is not a concern for the Veo3 thanks to its 64-bit Linux operating system because it can count on a fast 128GB SSD memory capacity allowing you to record huge amounts of information in a single acquisition file. With its advanced technology the Veo3 is unique in allowing real-time multi-scan/multi-technique capabilities. Simultaneous TFM, PA and TOFD views are now possible.

Intuitive Menus & Workflow
The intuitive menu system is application and workflow driven, with set up and operation swiftly becoming second nature. Integrated help and wizards guide the user through scan set up whilst optimization tips ensure the Veo3 always performs at the highest level. Fast and efficient wizards for sound velocity; wedge delay, TCG, DAC, TOFD setup and encoder calibration are all provided as standard. The inspection plan shows the operator in 3D where probes are positioned on the test part, simplifying the inspection set up and providing an inspection reference for reporting. Using the latest computer technology, data can be permanently recorded for processing and report generation. All adjustments to focal laws are instantaneous, with angle resolution to 0.1° and up to 1024 focal laws without loss of performance.

FMC / TFM
With its unique architecture the Veo3 can generate up to six live TFM scans, produced from multiple FMC sources on different probes, and also generates TFM images of up to 500k pixels with a maximum resolution of 100 pixel per mm without limiting the number of pixel per axis. All of the data received during Full Matrix Capture (FMC) scanning can be recorded on the Veo3. As a result, further detailed analysis can be performed including comparison with previous inspection data to identify trends and flaw/corrosion growth rates. The Veo3 can combine up to 4 live TFM modes. As known as TFMi, the details of the defects have never been so close to the reality. That imaging scan provides a high-precision height assessment and an improved shape accuracy compared to conventional PA inspections. The ability to characterize the type of defects is now effortless. This technique has indeed demonstrated superior results on weld analysis.

Standard Kit Includes:

  • Veo3 Phased Array Flaw Detector
  • 2 Lithium Ion Batteries
  • External USB Stick 8GB G3
  • Ruler
  • PA 15V 4A AC/DC Power Adapter
  • Quick Start Guide - Hard Copy
  • User Manual & Quick Start Guide USB
  • Carry Strap
  • Transport Case
  • Screen Protector (Clear or Tinted)
  • UTstudio Standard License

Specifications:

GeneralPhased Array (32:128PR)UT-TOFD (2PR)Live TFM
Multi-scan QuantityUp to 8 scansUp to 2 scans (UT & TOFD)Up to 6 scans
Pulsers/Receivers32:128PR2PR (4 connectors)Up to 64 elements probe
Gain Range80dB100dB80dB
Sampling Frequency125 MHz @ 12-Bit50/100/200 MHz @ 10-Bit125 MHz @ 12-Bit (processing 16-Bit)
System Bandwidth0.2 to 23 MHz0.2 to 18 MHz0.2 to 23 MHz
Max Pulse Rate Frequency50,000 Hz20,000 Hz50,000 Hz
Pulse Voltage100-50V ActiveEdge400-100V ActiveEdge100-50V ActiveEdge
Focusing ModeNatural or Constant Depth/Path/OffsetN/AFocusing in all points TFM & two TFM Intermode methods
S-Scan ResolutionUp to 0.1°N/ADown to 0.01mm
L-Scan ResolutionDown to 1 element or Double ResolutionN/ADown to 0.01mm
Max PA Beams (focal laws)Up to 1024 beamsN/AUp to 500,000 pixels
Tools - Measurements and WizardEXTRACTION BOX, 4 gates/A-Scan, TCG, DAC/Split-DAC4 gates/A-Scan, TCG, DGS/Split DGS, DAC/Split-DAC12 TFM algorithms, Up to 4 modes per TFMiTM, EXTRACTION BOX, 4 gates, Velocity, TCG, Amplitude fidelity, up to 20 cursors/view
Onboard Scan Plan ToolsOnboard 3D live rendering
Onboard Reporting ToolsPDF auto-report, Export data to CSV file, Save screen capture
Onboard PDF Reader IntegratedAbility to load and read and PDF documents
Online Help CalibrationACTIVE help genius for parameter optimization procedures, reports
StandardsISO18563 (EN16392) & EN12668
Operating Time6 hours (hot swappable batteries)
Power InputAC 110V/240V @ 50Hz/60Hz
Unit Dimensions4.52" x 8.6" 8.8" (115 x 220 x 225mm)
Weight11 lbs. (5.1 kg) no battery, 460 g
Environmental RatingDesigned for: IP66
Retaining the best features of the established Veo line, the new Veo3 now offers a PCAP touch interface, user templates, and more importantly, live TFM. Key design elements of the Veo3 are user and performance focused. Based on superior and innovative digital technology and its live concurrent multi-scan / multi-technique capabilities, the Veo3 truly helps you to inspect with confidence.
$4,800.00
NEW SONATEST PRISMA PHASED ARRAY FLAW DETECTOR SALE!! (SONATEST PRISMA PHASED ARRAY FLAW DETECTOR)

The prisma ultrasonic flaw detector offers the end user, outstanding performance in the field together with the flexibility and capability to step up from using a high-end ultrasonic flaw detector to an instrument with phased array functionality.

All models have TOFD capability on board, together with excellent reporting output. Typical applications are broad but include Rail Testing, Weld inspection, Corrosion Mapping, Aerospace and Composite Testing.

The Prisma ultrasonic flaw detector offers the end user outstanding performance in the field together with the flexibility and capability to step up from using a high-end ultrasonic flaw detector to an instrument with phased array functionality. Simple controls, superior performance, advanced features and a rugged enclosure deliver simplicity, capability and reliability to the technician’s finger tips. With the best display size and resolution in it’s category, the Prisma provides the end user with an intuitive and workflow driven interface, excellent imaging capability using the Full screen mode allowing 100% of the display to be used for Scan Imaging. Take full advantage of the advanced display modes which include smoothing, contouring and averaging all available to enhance your signal quality. The Prisma is designed to meet IP66; which ensures the unit is fully sealed against fine dust and jets of water.

Sonatest’s Prisma PA model provides the user with an ultrasonic Phased Array flaw detector. The tool contains PA capability from 16:16 manual to 16:64, with 2D encoding. It features an updated imaging system that allows the A scan, B scans and C scans to be used. The 3D ScanPlan includes the part, weld, wedge, probe and scan coverage. Prisma can be used in different areas of applications, such as aerospace, marine, composite and corrosion applications. In addition, the Prisma Phased Array equipment comes with numerous palettes for all scans. Prisma gives you the opportunity of using conventional UT and TOFD when required. The Phased Array equipment is also capable of complete data recording, including screen shots.

Features:

As Simple As You Want

  • 30 second configuration
  • No Delay - UT to PA - one button away
  • Configuration and Calibration Wizards
  • "Parameter Genius" giving you step by step assurance
  • Minimize training due to the common user interface
  • UT Studio provides fast & dynamic reporting

As Capable As You Need

  • UT, TOFD & PA Inspection Modes
  • Multi-mode validation of inspection
  • Upgradeable anytime, anywhere!
  • Unique cursors for precision measurement
  • Recordability: screen shots, full data recording, fully traceable.
  • Customizable imaging layout - 29 to choose from.

3 Models Available:

Prisma UT
The Prisma UT model is fully loaded, with all the basic and advanced features of the Sonatest flaw detector range. Prisma UT offers damping control to either optimize near surface resolution or energy transmission. The ability to capture screens is standard, combined with automatic reporting capabilities enable reports to be formatted with relative customer information such as logos etc. The most popular flaw sizing techniques such as DAC, AVG/DGS, TGC and AWS are all on-board. Thanks to the on-board B and C-Scan imaging capabilities, the Prisma UT enables field technicians to conduct corrosion and composite inspections, together with comprehensive on-site thickness profiling.

Prisma TOFD
The Prisma TOFD brings to the market a truly portable and powerful TOFD unit. The Prisma offers the best digitizing frequency going up to 200MHz, meaning that high frequency transducers can be used, ensuring the most accurate flaw height sizing possible. With 2 UT channels, the Prisma permits the inspection of thick components in a single pass. This is enhanced by the high voltage square wave pulsers delivering up to 450V, cutting the need for an external pre-amplifier. Prisma TOFD offers the complete hardware configuration to deliver the best performance, but it would be incomplete without the on-board software features such as hyperbolic cursors, lateral wave straightening and lateral wave removal.

Prisma PA
Ultrasonic Phased Array technology has become the established method for advanced NDT testing applications. Phased Array Techniques allow the user to cover a wider volume of inspection; such as being able to cover the complete span of a weld without the need to move or reposition the transducer. This is possible due to phased array enabling beams to be electronically steered. This technique results in comprehensive imaging of the results showing a quasi cross section of the inspected part. With the Prisma PA you can switch easily and quickly between the UT and PA operating modes with a simple press of a button, no data or time is lost. The Inspection Plan shows the operator in 2D and 3D where probes are positioned on the test part, simplifying the inspection set up and providing an inspection reference for reporting. All adjustments to focal laws are instantaneous. Multiple sectorial scans, true top, side and end view extractions, together with C-Scans, are all supported.

Specifications:

 Conventional UTPhased Array
Pulsers
Configuration2 UT Channels16:16 or 16:64
Test ModePulse-Echo, Transmit/Receive and TOFDPulse-Echo, Transmit/Receive
Transducer SocketLEMO 1 or BNCI-PEX
Pulse Voltage-100V to -450V (in steps of 10V)-25V to 75V (in steps of 5V)
PRF1 Hz to 1500 Hz1 Hz to 5000 Hz
Pulse ShapeNegative Square Wave (with ActiveEdge)Negative Square Wave (with ActiveEdge)
Pulse WidthAdjustable: Spike to 2000ns (2.5ns resolution)Adjustable: Spike to 1000ns (2.5ns resolution)
Edge Time15 ns in 50 Ω load @ 200V12 ns in 50 Ω load @50V
Output Impedance5 Ω<10 Ω
Trigger SynchronizationOn encoder resolution or internal PRF (both encoded or not)On encoder resolution or internal PRF (not encoded)
Focus Delay RangeN/A0 to 10 μs (2.5 ns resolution)
Damping ResistorSelectable 50 Ω or 400 ΩN/A
Receivers
Gain Range100 dB (0.1 dB steps) Analogue Gain0 to 76 dB (0.1 dB steps) Analogue Gain
Max Input Voltage25 Vp-p200 mVp-p
Input Impedance1 kΩ (pitch and catch)200 Ω
Bandwidth200 kHz to 22 MHz (-3 dB)200 kHz to 14 MHz 
Analog Filters4 (automatic or manual)3 (automatic)
Digital Filters10 (automatic or manual)10 (automatic or manual)
RectificationFull wave, positive, negative, none (RF)Full wave, positive, negative, none (RF) 
Signal EnhancementDigital filters, Smoothing, Contouring, Rejection, AveragingDigital filters, Smoothing, Contouring, Rejection 
Focus Delay RangeN/A0 to 10μs (16ns resolution interpolated to 3.8ns)
Data Acquisition   
Architecture2 channels, true 200 MHz sampling rate16 channels, Full Digital Delay & Sum
Digitizer Resolution12 bit ADC12 bit ADC
Amplitude Measurement[0% to 100%] or [0% to 150%] FSH[0% to 100%] or [0% to 150%] FSH
Data Processing16 bit/sample16 bit/sample
Data RecordingFull raw data recording (plus sub-sampling options)Full raw data recording (plus sub-sampling options)
File SizeUp to 3 GBUp to 3 GB
Digitizing Frequency50 MHz, 100 MHz, 200 MHz65 MHz
Focal LawsN/A128
Focusing ModeN/ANatural or constant depth/path/offset
Max A-Scan Length8192 samples4096 samples
Sub-Sampling1:1 to 1:281:1 to 1:28
ReferenceInitial Pulse or Gate/IFT supportedInitial Pulse or Gate/IFT supported
Trigger Sync.Encoder or InternalEncoder or Internal
Scan & Views
Supported ScansA-Scan & TOFDS-Scan & L-Scan
Number of ScansUp to 21 (with up to 3 extracted A-Scans)
ViewsA, B, C-Scan, Merged & TOFDA, B, C, L, S-Scan, Merged plus true TOP & END
Color MapsUp to 10Up to 10
Number of Layouts1835
Cursors
Cursor TypesCartesian, Hyperbolic (TOFD)Cartesian, Extraction Box, Angular
MeasurementsPath Length, Depth, Surface Distance, DAC, AWS, DGSPath Length, Depth, Surface Distance, DAC, AWS
DAC & TCG
DAC Points1616
DAC1 with 3 "sub DACs"1 with 3 "sub DACs" per focal Law
TCG Points1616
Gain Range60 dB40 dB
Max Gain Slope60 dB/μs50 dB/μs
Gates
A-Scan Gates4 gates per A-Scan4 gates per A-Scan (3 extracted A-Scans per S/L-Scan)
Gate TriggerFlank/PeakFlank/Gate
S/L-ScanN/A1 Extraction Box
Alarm LED2 (sync on all gates & DACs)2 (sync on all gates & DACs)
Measurements (A-Scan)Peak & Flank (FSH, dB, Depth, Beam Path Length, Surface Distance), Echo-to-Echo, Floating Gates (reference from IFT)Peak & Flank (FSH, dB, Depth, Beam Path Length, Surface Distance), Echo-to-Echo, Floating Gates (reference from IFT)
Interface & Reporting
Integrated HelpActive help & parameter description / Optimization
Remote ConnectionOnboard VNC Server and FTP Server (connection through Ethernet protocol)
WizardsConfiguration, Velocity and Zero, Wedge Delay, Sensitivity, TCG, DAC, DGS, Element Activation, Encoder
LanguagesSelectable: English, German, French, Spanish, Russian, Chinese, Hungarian, Italian, Portuguese
Report GenerationPDF Report (includes customer logo, scan acoustic parameters, measurements, etc.), PNG screen capture.
PDF ReaderAllows viewing any uploaded PDF file, scan plan, procedures, old reports etc..
Inputs & Outputs
Encoder1 or 2 axis encoding (quadrature input)
Digital Inputs2 input lines (5V TTL)
Digital Outputs4 Output lines (5V TTL, 20mA) for alarm or other external control
Power Output5V, 350 mA, current limited
Enclosure
Dimensions205 x 300 x 90mm
Weight3.5 kg with battery
Display Size8.4" (diagonal)
Display Resolution800 x 640 pixels
Display Colors260k (65535 colors for scan palettes)
Display TypeTFT LCD, 450 Cd/m2, with 2% reflectivity
USB Ports3 USB Master ports
Ethernet100 Mbps
Battery & Power Supply
Battery TypeIntelligent Li-ion
Number of Batteries1
OperationOn battery or on External Power (DC Power Pack)
Battery ReplacementYes, no tools required
Battery RechargeRecharge in unit (with unit On or OFF) - External Battery Charger (std) (as per EN16392)
Battery LifeTypical: 7 hours in UT mode, 6 hours in PA mode
Environmental
IP RatingDesigned to meet IP66
Operating Temperature14°F to 113°F (-10°C to 45°C)
Storage Temperature-13°F to 140°F (-25°C to 60°C)
The prisma is an advanced ultrasonic flaw detector offering the technician an extremely comprehensive tool for test and measurement, which can be upgraded to include TOFD and Phased Array capability. An upgrade can be carried out wherever you are, there is no need to return the instrument, eliminating any downtime.
$4,000.00
USED SONATEST SITESCAN 150S ULTRASONIC FLAW DETECTOR SALE!! (SONATEST SITESCAN 150S ULTRASONIC FLAW DETECTOR)

For over 20 years the Sitescan name has meant highly reliable, technician focussed flaw detectors and the new range continues this tradition. From the 123W entry level model to the high specification 250S - ease of use, rugged construction and high quality amplifiers are key elements of the design. Typical applications are weld inspection, corrosion testing, small castings/forgings and lamination checking.   

Advanced Defect Sizing Tools as Standard
Weld and pipe inspection are major applications for the Sitescan series and we have therefore equipped them with the latest software tools for defect sizing. The 123W has DAC, while the 150S and 250S have DAC, AVG, AWS and API sizing techniques. The use of integrated sizing software reduces analysis time and hence speeds inspection.
Multiple standard sizing techniques are essential for service companies working to different customer standards, especially as service work becomes more international and operators are required to work to different codes.

High Visibility Display
For any flaw detector the display is a crucial element. The Sitescan has a colour transflective TFT display as standard, providing high visibility at any light level. The choice of colours for menus and waveform display enhance clarity, with the LCD simulation mode giving direct sunlight readability. The TFT does not suffer the typical black out problems or temperature limitations of LCD giving full weather capability. The new Full Screen mode maximizes the A-scan area to improve readability further whilst testing and its fast response and peak capture functionality ensure any indication is clearly displayed, even if it only appears for one cycle of the PRF.

High Performance with Total Control
The Sitescan delivers high performance and advanced features, yet our engineer's experience in user interface design has ensured it is easy and quick to use. The acknowledged ease of use of previous generation Sitescans has been enhanced with the menu navigation key, providing easy access to functions. The menu structure has been designed to guide the user through their task with operation quickly becoming second nature.

Robust and Reliable
Sonatest's reputation for robust design and proven reliability is an important aspect of flaw detector ownership. Down time is expensive and should be minimized to ensure maximum productivity. The Sitescan series is constructed to high standards using Xenoy plastics and sealed to IP67, giving excellent water resistance so it can withstand the tough environments in which operators work.

Models in The Range
Based on the 123W the 150S has the same broadband amplifier enhanced with all the software features required to improve operator efficiency and accuracy. These includes standard sizing tools, advanced measurement modes, full screen waveform display, thickness reading memory and an automatic calibration feature.

Features:

  • Colour Reference Feature
  • An A-scan from a known defect free component can be stored and recalled in a different colour to the live A-scan. This effectively means that defects are highlighted in a different colour to the natural reflectors, enabling quicker and more reliable defect detection.
  • Flexible Measurement
  • Two independent bar monitor gates offer a range of measurement options for signal height or distance using either flank or peak triggering. The echo-to-echo mode gives through paint thickness readings while the G1-G2 mode allows accurate gate positioning for signals which are extremely close together.
  • The TRIG function gives surface distance and depth when using angle beam transducers.
  • Curve Surface Correction
  • When using angle beam transducers on a curved surface the Sitescan will calculate the surface distance and depth of defect, taking into account the internal or external radius.
  • Flaw Sizing
  • Automatic flaw sizing using DGS/AVG, AWS D1.1, API 5UE, speeds reporting of defect acceptance or rejection.
  • Help Facility
  • Full instructions for all functions are clearly displayed. A very useful function for multi-disciplined technicians who use a variety of NDT techniques and do not use the Sitescan on a day-to-day basis.
  • Full Screen A-scan
  • In full screen mode the A-scan fills the display improving visibility.
  • Fast Set Up Screen
  • The split screen mode enables fast set up and overview of basic parameters.
Sonatest's comprehensive range of portable ultrasonic flaw detectors provide the end user with unrivalled flexibility and performance in the field of Non Destructive Flaw detection.
$1,300.00
NEW SONATEST MASTERSCAN 700M ULTRASONIC FLAW DETECTOR SALE!! (SONATEST MASTERSCAN 700M ULTRASONIC FLAW DETECTOR)

The Masterscan 700M offers the end user a high end narrowband flaw detector with a full VGA display, sync and proportional outputs, sync input and a Spike and Square Pulser. Features like high levels of near surface resolution, penetrating power (450V pulser - square and spike) and excellent signal to noise ratio, can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. The Masterscan 700M's enclosure is constructed using impact resistant materials and is designed to meet IP67 standards, offering excellent water resistance and harsh conditions. 

Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings & Castings, Power Generation (including EMATS) and general UT inspection.

Features

  • Configurable on-board software
  • Customizable & intuitive menus
  • Split DAC/AVG
  • Angle measurement mode
  • Dryscan capability
  • Encoded B-Scan
  • A-Scan fade
  • 4GB on-board memory
  • USB interface for PC import/export

Reliable, Rugged & Robust
An instrument's ability to perform in harsh environments with proven reliability is an important aspect of flaw detector ownership and this is enhanced by the Masterscan's outstanding battery performance which is up to 18 hours from full charge. The Masterscan's enclosure is constructed using automotive grade impact resistant materials, offering excellent water resistance. Explosive Testing MIL810-G standards have been passed, together with environmental testing which has confirmed the instrument fully functioning at temperatures above 55°C. The Masterscan series has a colour transflective VGA display and maximum readability is achieved through adjustable brightness and the choice of 9 colour palettes, including a black-on-white LCD emulation mode.

Advanced Defect Sizing Tools as Standard
Weld and pipe inspection are major applications for the Masterscan series and they are equipped with the latest software tools for defect sizing. The use of integrated sizing software reduces analysis time and speeds inspection. Multiple standard sizing techniques are essential for service companies working to different customer standards, especially as service work becomes more international and operators are required to work to different codes.

UT-Lity Data Management Software
Ut-Lity software provides everything you need to manage your inspection data. The Standard version is FREE with every instrument and give you the ability to view, move and manage Calibrations, A-Scans, B-Scans and Thickness Logs both on the instrument and on your PC. With UT-Lite you can also create customised inspection report templates, cut-n-paste information to other applications and create printable pdf documents.

  • Load, store, manage files both on the PC and on a connected flaw detector
  • Save, analyse, colour code and export thickness logging data to spreadsheets/asset management software
  • Update the Flaw Detector and Firmware as and when updates become available on our website

Sizing Techniques & Software Options include:

  • DAC (Standard)
  • Split DAC & DGS / AVG (Option)
  • TCG (Option)
  • Backwall Echo Attenuation (BEA) Option (requires TCG)
  • AWS (Option)
  • AVG / DGS Option
  • API (Option)
  • Interface Trigger (Option)
  • Corrosion Software (Option)
  • Dryscan Function (Option)

Standard Masterscan 700M Kit Includes

  • Masterscan 700M Digital Flaw Detector
  • Battery, Charger & Charger Mains Cable
  • User Guide & Calibration Certificate
  • Certificate of Conformance
  • Carry Bag
  • UTLity & USB Cable
  • Display Window Cover
  • Ultrasonic Couplant

Specifications:

Test Range:0.04" (0-1mm) up to 787" (0-20,000mm) in steel at 19455f/s (5930m/s)
Velocity:256 - 16000 m/s continuously variable
Probe:0 to 1000 μs
Delay:800" (0-20,000m) in steel at 5930 m/s
Gain:0 to 110dB adjustable in 0.1, 0.5, 1, 2, 6, 14 and 20dB steps
Test Modes:Pulse echo and transmit/receive. Single Crystal, Double Crystal and Pitch-Catch.
Damping:50 and 400 Ohm damping selectable
Pulser:100-450V - ve spike and square wave. Pulse Width from 30nS to 2500nS. Rise/Fall times <5nS into 50R load.
P.R.F:Adjustable 5Hz to 6kHz. External sync also available.
Screen Update Rate:60Hz
Rectification:RF, Full wave, ve half-wave and -ve half-wave
Frequency Range:

8 selectable filter bands

  1. 100kHz - 500kHz
  2. 200kHz - 800kHz
  3. 0.4MHz - 1.6MHz
  4. 1.4MHz - 3.0MHz
  5. 3.0MHz - 8.0MHz
  6. 7.0MHz - 15.0MHz
  7. 9.0MHz - 21.0MHz
  8. 1.6MHz - 33.0MHz (Wideband)
  9. Additional tuned low frequency pre-amp with Dryscan option.
System Linearity:Vertical = 0.5% Full Screen Height (FSH); Horizontal /-0.2% Trace Full Screen Width (FSW)
Reject (Selectable):Up to 80% Linear reject (removes baseline noise without affecting indication amplitude) or Up to 50% Suppressive reject (increase zero offset and reduces amplitude of all echoes).
LED Warning when active.
Units:Metric (mm), inch (in) or microseconds
Display:Color Transflective VGA (640 x 480) TFT
Display Area: 4.57" x 3.43" (116.16 x 87.2mm)
A-Scan Area: 400 x 510 pixels (normal), 460 x 620 (FS).
Colors: 9 color options with variable brightness.
Gate Monitor:Two independent gates for measurement and monitoring. Start and width fully adjustable over the entire range of the instrument. Levels adjustable from 0% to 100%, positive or negative triggering on each gate with audible & visible alarms. Gate resolution is 5Ns.
Zoom:Expands range and delay to cover the area set by Gate 1 start & width controls.
AGC:Automatic Gain Control automatically sets the signal in Gate 1 to a level between 10% and 90% FSH, tolerance between 5% and 20%.
Contour:Trailing-Edge-slew-rate control to reduce half cycles in rectified modes. Selectable from one of 6 levels.
Waveform Smoothing:

Select from

  1. None (both min and max values are displayed in the A-Scan)
  2. Fill (Min values set to baseline value, produces a solid A-Scan)
  3. Smooth (min values ignored, produces a clear outline A-Scan)
Persistence:Causes previous A-scans to "fade out" at a user-determined rate
Auto-Cal:Provides automatic calculation of velocity and probe zero from 2 reference echoes.
Reference Waveform:Displays a previously stored A-log in a color different from the active display, enabling a quick visual check of the differences.
Clock:Built in, battery-backed RTC keeps time and date. Visible on the status line, always stored with Panels, A-logs, etc.
Internal Memory:4GB storage available for A-scans, panels, T-logs, B-logs, etc... 450,000 Panels, 200,000 A-Logs, 300,000 B-Charts, 440,000 T-Logs.
Active Peak Memory:Retains all A-scans on screen for echo-dynamic pattern analysis, with the active A-scan displayed in a separate color.
Notes:Alphanumeric labelling for panel stores, A-logs, B-logs, etc...
Display Freeze:Hold the current waveform on screen for off-line processing
Help Key:Shows software and hardware information
Language Support:Multiple languages are selectable from a list including: English, French, Spanish, Russian, Chinese (Modern). Others are available upon request.
Encoder Connection:D-Sub 15 connector
Video Output:Standard on 700M
Proportional Outputs:Available on 700M
External Sync:Available on 700M
USB Connection:Internal Storage shown as Memory Device.
Transducer Sockets:BNC or LEMO (factory option)
Power:Lithium Ion 14.4V battery pack. Typically 16 hours for Masterscan 700M. Indication of battery charge status. Recharge time 3-4 hrs. Battery can be charged separately. Mains pack optional.
Charger:100-240 VAC, 50-60 Hz
Environmental:Designed to meet IP67
Temperature:Operating: 14°F - 131°F (-10°C - 55°C)
Storage: -40°F - 167°F (-40°C - 75°C)
Dimensions:5.7" x 10" x 5.7" (145 x 255 x 145mm)
Weight:5.5 lbs. (2.2kg) with battery
Warranty:2 year
Extended Warranty:Sonacover - extended 5 year warranty, including 4 calibrations.
Calibration Standard:EN12668-1:2010 (Detailed Specification available upon request).
Standards:Vibration to 514.5-5 Proc 1 Annex Fig 6
Shock 516.5 Proc 1 15g/6ms
Explosive atmospheres - MIL-STD 810G
Method 511.5 Procedure 1
The Masterscan name has always assured the technician of robust instrument construction combined with exceptional performance. Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser - square and spike) and excellent signal to noise ratio are key functions in the Masterscan range.
$3,600.00
USED SONATEST MASTERSCAN D-70 ULTRASONIC FLAW DETECTOR SALE!! (SONATEST MASTERSCAN D-70 ULTRASONIC FLAW DETECTOR)

The Masterscan D-70 offers the inspector a fully capable and functional set of tools and software for inspection across all applicated. Constructed using impact resistant materials and designed to meet IP67 standards, the D-70 offers excellent water resistance. The D-70 has a color transflective VGA display, providing high visibility in any lighting condition, with the enhanced user interface and a full screen A-Scan display is available at the touch of a button. Features can be added and new upgrades performed in the working environment, reducing downtime and increasing work flexibility. High levels of near surface resolution, penetrating power (450V pulser - square and spike) and excellent signal to noise ration are key functions of the Masterscan D-70. Capabilities include Encoded B-Scan, Advanced Thickness logging and Dryscan capability in a portable enclosure.

Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings and Castings, Power Generation (including EMATS and general UT inspection).


Features

  • Configurable on-board software
  • Customizable & intuitive menus
  • Split DAC / DVG(AVG)
  • Angle Measurement Mode
  • Dryscan Capability
  • Field Upgradeable
  • Encoded B-Scan
  • A-Scan Fade
  • 4GB on-board memory
  • USB Interface for PC import / export

High Visibility Display
For any flaw detector the display is a crucial element. The Masterscan series has a colour transflective VGA display, providing high visibility in any lighting conditions. Maximum readability is achieved through adjustable brightness and the choice of 9 colour palettes, including a black on white LCD emulation mode. Simplicity reigns with the enhanced user interface and a full screen A-Scan display is available at the touch of a button, so that every detail of the A-Scan can be easily seen.

3Rs – Reliable, Rugged & Robust
The ability to perform in harsh environments with proven reliability is an important aspect of flaw detector ownership. Maximum operational time is promoted by outstanding battery performance. Up to 18 hours from full charge. The Masterscan’s enclosure is constructed using automotive grade impact resistant materials and is designed to meet IP67 standards, offering excellent water resistance. Explosive testing MIL810-G standards have been passed, together with environmental testing which have confirmed the instrument fully functioning at temperatures above 55deg C.


Applications:

  • Weld fabrication
  • Corrosion detection
  • Composite inspection
  • Bond testing
  • Forgings
  • Castings
  • Power generation (including EMATS and general UT inspection)

Specifications:

Test Range:0.04" - 787" (0-1mm up to 0-20,000mm) in steel at 5930m/s (19455f/s)
Velocity:256 - 16,000 m/s continuously variable
Probe:0 to 1000 μs
Delay:800" (0-20,000m) in steel at 5930m/s.
Gain:0 to 110dB adjustable in 0.1, 0.5, 1, 2, 6, 14 and 20dB steps.
Test Modes:Pulse echo and transmit/receive. Single Crystal, Double Crystal and Pitch-Catch.
Damping:50 and 400 ohm damping selectable.
Pulser:100-450V - ve spike and square wave. Pulse Width from 30nS to 2500nS. Rise/Fall times <5nS into 50R load.
P.R.F:Adjustable 5Hz to 6kHz. External sync also available.
Screen Update Rate:60Hz
Rectification:RF, Full wave, ve half-wave and -ve half-wave
Frequency Range:8 selectable filter bands.
  1. 100kHz - 500kHz
  2. 200kHz - 800kHz
  3. 0.4MHz - 1.6MHz
  4. 1.4MHz - 3.0MHz
  5. 3.0MHz - 8.0MHz
  6. 7.0MHz - 15.0MHz
  7. 9.0MHz - 21.0MHz
  8. 1.6MHz - 33.0MHz (Wideband)
  9. Additional tuned low frequency pre-amp with Dryscan option.
System Linearity:Vertical = 0.5% Full Screen Height (FSH). Horizontal /- 0.2% Trace Full Screen Width (FSW).
Reject (Selectable):Up to 80% Linear reject (removes baseline noise without affecting indication amplitude)
Or
Up to 50% Suppressive reject (increase zero offset and reduces amplitude of all echoes)
LED Warning when active.
Units:Inch (in), Metric (mm) or microseconds
Display:Color Transflective VGA (640 x 480) TFT
Display area: 116.16 x 87.2 mm (4.57 x 3.43 in).
A-Scan Area: 400 x 510 pixels (normal), 460 x 620 (FS).
Colors: 9 color options with variable brightness.
Gate Monitor:Two independent gates for measurement and monitoring. Start and width fully adjustable over the entire range of the instrument. Levels adjustable from 0% to 100%, positive or negative triggering on each gate with audible & visual alarms. Gate resolution is 5nS.
Zoom:Expands range and delay to cover the area set by Gate 1 start & width controls.
AGC:Automatic Gain Control automatically sets the signal in Gate 1 to a level between 10% and 90% FSH, tolerance between 5% and 20%.
Measurement Modes:
Mode 1:Signal monitor, Gate alarms can be active but no measurements are displayed.
Mode 2:Depth and amplitude of first signal in gate.
Mode 3:Echo-Echo distance measurements.
Mode 4:Trigonometric display of beam-path, surface distance (including X-offset) and depth of indication from the inspection surface together with echo amplitude. Curved surface correction can be applied for convex and concave surfaces. Half-skip can be indicated on screen.
Mode 5:Gate to Gate distance measurement.
Mode 6:Flank to Flank
Mode 7:Beam Angle, calculated from beam path, hole radius and hole center depth.
Measurement Display:Live display and updates on screen at 3 times per second. Large display of a single measurement available.
Contour:Trailing-Edge slew-rate control to reduce half cycles in rectified modes. Selectable from one of 6 levels.
Waveform Smoothing:Select from:
  1. None (both min and max values are displayed in the A-Scan)
  2. Fill (Min values set to baseline value, produces a solid A-Scan)
  3. Smooth (Min values ignored, produces a clear outline A-Scan)
Persistence:Causes previous A-scans to “fade out” at a user-determined rate.
Auto-Cal:Provides automatic calculation of velocity and probe zero from 2 reference echoes.
Reference Waveform:Displays a previously stored A-log in a color different from the active display: enabling a quick visual check of the differences.
Clock:Built in, battery-backed RTC keeps time and date. Visible on the status line, always stored with Panels, A-logs etc.
Internal Memory:4 GB storage available for A-scans, panels, T-logs, B-logs etc. 450,000 Panels, 200,000 A-Logs, 300,000 B Charts, 440,000 T-Logs.
Active Peak Memory:Retains all A-scans on screen for echo-dynamic pattern analysis, with the active A-scan displayed in a separate color.
Notes:Alphanumeric labelling for panel stores, A-logs, B-logs etc.
Display Freeze:Hold the current waveform on screen for off-line processing.
Language Support:Multiple languages are selectable from a list including:
English, French, Spanish, Russian, Chinese (Modern). Others are available on request.
Encoder Connection:Lemo min 4-pin connector (D70)
Video Output:Factory Option on D-70.
USB Connection:Internal storage shown as Memory Device.
Transducer Sockets:BNC or LEMO (factory option).
Power:Lithium Ion 14.4V battery pack. Typically 12 hours for D-70. Indication of battery charge status. Recharge time 3-4 hrs. Battery can be charged separately. Mains pack optional.
Charger:100-240 VAC, 50-60 Hz.
Environmental:Designed to meet IP67
Temperature:Operating: 14° to 131°F (-10° to 55°C)
Storage: -40° to 167°F (-40° to 75°C)
Size:6.77" x 9.37" x 2.75" (172 x 238 x 70mm) (HxwxD)
Weight:3.7 lbs. (1.7 kg) with battery
Warranty:2 year
Extended Warranty:Sonacover - extended 5 year warranty, including 4 calibrations.
Calibration Standards:EN12668-1:2010 (Detailed Specification available on request).
Standards:Vibration to 514.5-5 Proc 1 Annex C Fig 6
Shock 516.5 Proc 1 15g/6ms
Explosive atmospheres - MIL-STD 810G
Method 511.5 Procedure I
The Sonatest Masterscan D-70 ultrasonic flaw detector offers encoded B-Scan, Advanced Thickness Logging and Dryscan inspection options. It also benefits from advanced defect sizing tools.
$1,500.00
NEW SONATEST MASTERSCAN D-70 ULTRASONIC FLAW DETECTOR SALE!! (SONATEST MASTERSCAN D-70 ULTRASONIC FLAW DETECTOR)

The Sonatest Masterscan D-70 ultrasonic flaw detector offers encoded B-Scan, Advanced Thickness Logging and Dryscan inspection options. It also benefits from advanced defect sizing tools.

The Masterscan D-70 offers the inspector a fully capable and functional set of tools and software for inspection across all applicated. Constructed using impact resistant materials and designed to meet IP67 standards, the D-70 offers excellent water resistance. The D-70 has a color transflective VGA display, providing high visibility in any lighting condition, with the enhanced user interface and a full screen A-Scan display is available at the touch of a button. Features can be added and new upgrades performed in the working environment, reducing downtime and increasing work flexibility. High levels of near surface resolution, penetrating power (450V pulser - square and spike) and excellent signal to noise ration are key functions of the Masterscan D-70. Capabilities include Encoded B-Scan, Advanced Thickness logging and Dryscan capability in a portable enclosure.

Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings and Castings, Power Generation (including EMATS and general UT inspection).


Features

  • Configurable on-board software
  • Customizable & intuitive menus
  • Split DAC / DVG(AVG)
  • Angle Measurement Mode
  • Dryscan Capability
  • Field Upgradeable
  • Encoded B-Scan
  • A-Scan Fade
  • 4GB on-board memory
  • USB Interface for PC import / export

High Visibility Display
For any flaw detector the display is a crucial element. The Masterscan series has a colour transflective VGA display, providing high visibility in any lighting conditions. Maximum readability is achieved through adjustable brightness and the choice of 9 colour palettes, including a black on white LCD emulation mode. Simplicity reigns with the enhanced user interface and a full screen A-Scan display is available at the touch of a button, so that every detail of the A-Scan can be easily seen.

3Rs – Reliable, Rugged & Robust
The ability to perform in harsh environments with proven reliability is an important aspect of flaw detector ownership. Maximum operational time is promoted by outstanding battery performance. Up to 18 hours from full charge. The Masterscan’s enclosure is constructed using automotive grade impact resistant materials and is designed to meet IP67 standards, offering excellent water resistance. Explosive testing MIL810-G standards have been passed, together with environmental testing which have confirmed the instrument fully functioning at temperatures above 55deg C.


Applications:

  • Weld fabrication
  • Corrosion detection
  • Composite inspection
  • Bond testing
  • Forgings
  • Castings
  • Power generation (including EMATS and general UT inspection)

Specifications:

Test Range:0.04" - 787" (0-1mm up to 0-20,000mm) in steel at 5930m/s (19455f/s)
Velocity:256 - 16,000 m/s continuously variable
Probe:0 to 1000 μs
Delay:800" (0-20,000m) in steel at 5930m/s.
Gain:0 to 110dB adjustable in 0.1, 0.5, 1, 2, 6, 14 and 20dB steps.
Test Modes:Pulse echo and transmit/receive. Single Crystal, Double Crystal and Pitch-Catch.
Damping:50 and 400 ohm damping selectable.
Pulser:100-450V - ve spike and square wave. Pulse Width from 30nS to 2500nS. Rise/Fall times <5nS into 50R load.
P.R.F:Adjustable 5Hz to 6kHz. External sync also available.
Screen Update Rate:60Hz
Rectification:RF, Full wave, ve half-wave and -ve half-wave
Frequency Range:8 selectable filter bands.
  1. 100kHz - 500kHz
  2. 200kHz - 800kHz
  3. 0.4MHz - 1.6MHz
  4. 1.4MHz - 3.0MHz
  5. 3.0MHz - 8.0MHz
  6. 7.0MHz - 15.0MHz
  7. 9.0MHz - 21.0MHz
  8. 1.6MHz - 33.0MHz (Wideband)
  9. Additional tuned low frequency pre-amp with Dryscan option.
System Linearity:Vertical = 0.5% Full Screen Height (FSH). Horizontal /- 0.2% Trace Full Screen Width (FSW).
Reject (Selectable):Up to 80% Linear reject (removes baseline noise without affecting indication amplitude)
Or
Up to 50% Suppressive reject (increase zero offset and reduces amplitude of all echoes)
LED Warning when active.
Units:Inch (in), Metric (mm) or microseconds
Display:Color Transflective VGA (640 x 480) TFT
Display area: 116.16 x 87.2 mm (4.57 x 3.43 in).
A-Scan Area: 400 x 510 pixels (normal), 460 x 620 (FS).
Colors: 9 color options with variable brightness.
Gate Monitor:Two independent gates for measurement and monitoring. Start and width fully adjustable over the entire range of the instrument. Levels adjustable from 0% to 100%, positive or negative triggering on each gate with audible & visual alarms. Gate resolution is 5nS.
Zoom:Expands range and delay to cover the area set by Gate 1 start & width controls.
AGC:Automatic Gain Control automatically sets the signal in Gate 1 to a level between 10% and 90% FSH, tolerance between 5% and 20%.
Measurement Modes:
Mode 1:Signal monitor, Gate alarms can be active but no measurements are displayed.
Mode 2:Depth and amplitude of first signal in gate.
Mode 3:Echo-Echo distance measurements.
Mode 4:Trigonometric display of beam-path, surface distance (including X-offset) and depth of indication from the inspection surface together with echo amplitude. Curved surface correction can be applied for convex and concave surfaces. Half-skip can be indicated on screen.
Mode 5:Gate to Gate distance measurement.
Mode 6:Flank to Flank
Mode 7:Beam Angle, calculated from beam path, hole radius and hole center depth.
Measurement Display:Live display and updates on screen at 3 times per second. Large display of a single measurement available.
Contour:Trailing-Edge slew-rate control to reduce half cycles in rectified modes. Selectable from one of 6 levels.
Waveform Smoothing:Select from:
  1. None (both min and max values are displayed in the A-Scan)
  2. Fill (Min values set to baseline value, produces a solid A-Scan)
  3. Smooth (Min values ignored, produces a clear outline A-Scan)
Persistence:Causes previous A-scans to “fade out” at a user-determined rate.
Auto-Cal:Provides automatic calculation of velocity and probe zero from 2 reference echoes.
Reference Waveform:Displays a previously stored A-log in a color different from the active display: enabling a quick visual check of the differences.
Clock:Built in, battery-backed RTC keeps time and date. Visible on the status line, always stored with Panels, A-logs etc.
Internal Memory:4 GB storage available for A-scans, panels, T-logs, B-logs etc. 450,000 Panels, 200,000 A-Logs, 300,000 B Charts, 440,000 T-Logs.
Active Peak Memory:Retains all A-scans on screen for echo-dynamic pattern analysis, with the active A-scan displayed in a separate color.
Notes:Alphanumeric labelling for panel stores, A-logs, B-logs etc.
Display Freeze:Hold the current waveform on screen for off-line processing.
Language Support:Multiple languages are selectable from a list including:
English, French, Spanish, Russian, Chinese (Modern). Others are available on request.
Encoder Connection:Lemo min 4-pin connector (D70)
Video Output:Factory Option on D-70.
USB Connection:Internal storage shown as Memory Device.
Transducer Sockets:BNC or LEMO (factory option).
Power:Lithium Ion 14.4V battery pack. Typically 12 hours for D-70. Indication of battery charge status. Recharge time 3-4 hrs. Battery can be charged separately. Mains pack optional.
Charger:100-240 VAC, 50-60 Hz.
Environmental:Designed to meet IP67
Temperature:Operating: 14° to 131°F (-10° to 55°C)
Storage: -40° to 167°F (-40° to 75°C)
Size:6.77" x 9.37" x 2.75" (172 x 238 x 70mm) (HxwxD)
Weight:3.7 lbs. (1.7 kg) with battery
Warranty:2 year
Extended Warranty:Sonacover - extended 5 year warranty, including 4 calibrations.
Calibration Standards:EN12668-1:2010 (Detailed Specification available on request).
Standards:Vibration to 514.5-5 Proc 1 Annex C Fig 6
Shock 516.5 Proc 1 15g/6ms
Explosive atmospheres - MIL-STD 810G
Method 511.5 Procedure I
The Masterscan name has always assured the technician of robust instrument construction combined with exceptional performance. Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser - square and spike) and excellent signal to noise ration are key functions in the Masterscan range.
$2,000.00
Per Page      1 - 17 of 17
  • 1